| Grade | ISO P0P2 | Grade Description | Coating Layers | Uncoated |
| CERMET IC20N | 5-5 M05-M15 | A very hard cermet grade for turning and grooving, recommended for finishing operations on steels and alloy steels at high cutting speeds and low feeds. Features excellent surface finish, high wear resistance, plastic deformation durability and prevents built-up edge. | Base | |
| IC4 | N01-N15 S05-S15 | A very hard-uncoated carbide grade, suitable for machining aluminum alloys, aluminum alloys with high silicon content and other non-ferrous materials at high cutting speeds. | Base | |
| OATED IC07 | M10-M20 N05-N20 S10-S25 | A hard-uncoated submicron carbide grade, suitable for machining aluminum alloys and other non-ferrous materials at high cutting speeds. | Base | |
| UNC IC08 | M15-M30 N10-N25 S20-S30 | A tough uncoated submicron carbide grade, suitable for steels, stainless steel and high temperature alloys at low cutting speeds. Good choice for non-ferrous materials. | Base | |
| IC20 | K10-K20 N05-N25 S10-S20 H10-H20 | A hard-uncoated carbide grade for machining aluminum and other non-ferrous materials at medium to high cutting speeds. Can be used for cast iron at low cutting speeds. Suitable also for machining high temperature and Titanium alloys, at low cutting speeds. | Base | |
| IB10H | | Extra fine PCBN grain size. Suitable for high speed machining of hardened steels (45-65 HRC) under stable conditions. | | |
| H10 | | Base | |
| CBN IB20H | | A combination of coarse and fine PCBN grain, suitable for general and interrupted cutting of hardened steels. | | |
| H20 | | Base | |
| IB50 | K01-K10 | A PCBN grade, suitable for finish turning and grooving operations on hardened steels 45-65 HRC and nodular cast iron in continuous cutting. | | |
| H01-H10 | | Base | |
| PCD ID5 | N01-N10 | A PCD brazed tip, suitable for machining aluminum alloys (Si < 12%) and other non-ferrous materials. Features very high wear resistance with high toughness. Suitable for finishing operations and can be used for semi roughning operations and interrupted cut. | Base | |
Каталог Iscar монолитные концевые фрезы и система multi-master
Фрезерные инструменты Iscar 2026
Каталог Iscar сверла ружейные и для глубокого сверления 2022
Каталог Iscar токарные державки ISO 2022
Каталог Iscar инструмент для обработки алюминиевых колёс