Каталог Iscar концевые фрезы со сменными пластинами 2022 - страница 29
Навигация
Каталог Iscar токарный инструмент
Инструменты для обработки отверстий Iscar 2026
Каталог Iscar токарные пластины ISO 2022
Каталог Iscar высокоточные развертки и метчики 2022
Каталог Iscar крепление инструмента
Каталог Iscar сверла ружейные и для глубокого сверления 2022
| DRVS | THSZ | MS | ||||||||||
| HM90 E90A-MM-10 90° Endmills with a | DC | DC | ONMS | Rd° | ||||||||
| MULTI-MASTER Threaded Adaptation Carrying HM90 | APMX | OAL LF | ||||||||||
| AP.. 1003... Inserts | ||||||||||||
| Designation | DC | CICT(1) | APMX | OAL | RMPX°(2) | LF | THSZMS | DRVS(3) | DCONMS | kg | ||
| HM90 E90A-D16-2-MMT10 | 16.00 | 2 | 10.00 | 34.75 | 15.0 | 23.00 | T10 | 13.0 | 15.30 | 0.03 | SR 34-505/HG | T-8/53 |
| HM90 E90A-D20-2-MMT12 | 20.00 | 2 | 10.00 | 38.30 | 7.5 | 24.60 | T12 | 16.0 | 19.20 | 0.05 | SR 34-505/HG | T-8/53 |
| HM90 E90A-D20-3-MMT12 | 20.00 | 3 | 10.00 | 38.30 | 7.5 | 24.60 | T12 | 16.0 | 19.20 | 0.05 | SR 34-505/HG | T-8/53 |
- Do not apply lubricant to the MULTI-MASTER threaded connection
- For adaptation see page 44
- For user guide see pages 542-548
(1) Number of inserts (2) Maximum ramping angle (3) Clamping wrench size
For inserts, see pages: APCR 1003PDFR-P (450) APCT 1003PDR-HM (450) APKR 1003PDR-HM (451) APKT 1003..R (453) APKT 1003..TR-RM (452)
- APKT 1003PDR-HM (451)
- APKT 1003PDR-HM-CS (451)
- APKT 1003PDTR-76 (452)
- APKT 1003PDTR/L-RM (452)
- APKT 1003R8T-FF (454)
- APKW 100304 PDR (PCD) (450)
- HM90 APCR 100304PDFR-P/DP (449)
- HM90 APCT 1003 (448)
- HM90 APKT 1003 (449)
- HM90 APKT 1003PD-W (453)
- HM90 APKW 1003PDR (453)
For holders, see pages: MM S-A (stepped shanks) (84) MM S-A (straight shanks) (87) MM S-A-C# (86) MM S-A-HSK (609) MM S-A-N (85)
- MM S-A-SK (90)
- MM S-B (85° conical shanks) (87)
- MM S-D (89° conical shanks) (88)
- MM S-ER (89)
- MM S-ER-H (89)
- MM TS-A (86)
| HM90 E90A-MM-10-JHP ° | D | RVS | THS | ZMS | ||||||||
| 90 JHP Endmills with a MULTI-MASTER Threaded Adaptation Carrying HELI2000 and HELIMILL Inserts | APMX DC | LF OAL | DCONMS | Rd° | ||||||||
| Designation | DC | CICT(1) | APMX | OAL | RMPX°(2) | LF | THSZM | S TQ3(3) | DRVS(4) | DCONMS | MIID(5) | kg |
| HM90 E90A D16-2-MMT10-JHP | 16.00 | 2 | 10.00 | 34.80 | 15.0 | 23.40 | T10 | 28 | 13.0 | 15.60 | APKT 1003PDR-HM | 0.10 |
| HM90 E90A D20-3-MMT12-JHP | 20.00 | 3 | 10.00 | 38.50 | 7.5 | 25.50 | T12 | 28 | 16.0 | 19.70 | APKT 1003PDR-HM | 0.15 |
| HM90 E90A D25-4-MMT15-JHP | 25.00 | 4 | 10.00 | 47.00 | 7.5 | 30.00 | T15 | 40 | 20.0 | 24.70 | APKT 1003PDR-HM | 0.05 |
- Do not apply lubricant to the MULTI-MASTER threaded connection
- For adaptation see page 44
- For user guide see pages 542-548
(1) Number of inserts (2) Maximum ramping angle (3) Tool tightening torque Nxm (lbfxin) (4) Torque key size (5) Master insert identification
For inserts, see pages: APCR 1003PDFR-P (450) APCT 1003PDR-HM (450) APKR 1003PDR-HM (451) APKT 1003..R (453) APKT 1003..TR-RM (452)
- APKT 1003PDR-HM (451)
- APKT 1003PDR-HM-CS (451)
- APKT 1003PDTR-76 (452)
- APKT 1003PDTR/L-RM (452)
- APKT 1003R8T-FF (454)
- APKW 100304 PDR (PCD) (450)
- HM90 APCR 100304PDFR-P/DP (449)
- HM90 APCT 1003 (448)
- HM90 APKT 1003 (449)
- HM90 APKT 1003PD-W (453)
- HM90 APKW 1003PDR (453)
For holders, see pages: MM CAB (667) MM GRT (shanks) (86) MM S-A (stepped shanks) (84) MM S-A (straight shanks) (87) MM S-A-C# (86)
- MM S-A-HSK (609)
- MM S-A-N (85)
- MM S-A-SK (90)
- MM S-B (85° conical shanks) (87)
- MM S-D (89° conical shanks) (88)
- MM S-ER (89)
- MM S-ER-H (89)
- MM TS-A (86)
Spare Parts
| Designation | |
| HM90 E90A-MM-10-JHP | SR 34-505/HG(a) BLD T08/M7 SW4-SD |
(a) Recommended tightening torque for this item: 1.2 Nxm