Каталог Iscar концевые фрезы со сменными пластинами 2022 - страница 25
Навигация
Каталог Iscar токарный инструмент
Инструменты для обработки отверстий Iscar 2026
Каталог Iscar токарные пластины ISO 2022
Каталог Iscar высокоточные развертки и метчики 2022
Каталог Iscar крепление инструмента
Каталог Iscar сверла ружейные и для глубокого сверления 2022
| HM390 ETP-C#-10 | Shank | Rd° | ||||||||||
| 90° Endmills Carrying HM390 TPKT 1003 Triangular Inserts with 3 Helical Cutting Edges | APMX DC | LU L | F | DCONMS | ||||||||
| Designation | DCONMS | DC | APMX | CICT(1) LU | LF | RMPX°(2) | Shank | CDI | kg | |||
| HM390 ETP D25-3-L39-C3-10 | 32.00 | 25.00 | 8.00 | 3 39.0 | 55.00 | 2.9 | CAMFIX | 0 | 0.21 | SR 14-562/S | BLD T10/S7 | SW6-SD |
| HM390 ETP D66-7-L52-C6-10 | 63.00 | 66.00 | 8.00 | 7 52.0 | 75.00 | 0.8 | CAMFIX | 1 | 1.80 | SR 14-562/S | BLD T10/S7 | SW6-SD |
- For user guide see pages 542-548
(1) Number of inserts (2) Maximum ramping angle
For inserts, see pages: HM390 TPKT/CT 1003 (447)
| HCE | DC A | DCON | MS | |||||||||
| Multifunction Endmills that C Carry Several Insert Geomet | an ries | BD LH | ||||||||||
| B | /D | BHTA | ||||||||||
| Designation | DC | LH | OAL | BD | DCONM | S Shank(1) | BHTA | Type | kg | |||
| HCE D12-A-L120-C12 | 12.00 | 30.0 | 120.00 | 11.10 | 12.00 | C | - | A | 0.10 | SR 34-540 | BLD T15/S7 | SW6-T |
| HCE D12-B-L160-C20 | 12.00 | 50.0 | 160.00 | - | 20.00 | C | 4.6 | B | 0.41 | SR 34-540 | BLD T15/S7 | SW6-T |
| HCE D12-D-L160-C16 | 12.00 | 60.0 | 160.00 | - | 16.00 | C | 1.9 | D | 0.21 | SR 34-540 | BLD T15/S7 | SW6-T |
| HCE D16-A-L130-C16 | 16.00 | 36.0 | 130.00 | 14.90 | 16.00 | C | - | A | 0.19 | SR 105739 | BLD T20/S7 | SW6-T |
| HCE D16-B-L160-C25 | 16.00 | 60.0 | 160.00 | - | 25.00 | C | 4.3 | B | 0.50 | SR 105739 | BLD T20/S7 | SW6-T |
| HCE D16-D-L160-C20 | 16.00 | 65.0 | 160.00 | - | 20.00 | C | 1.7 | D | 0.32 | SR 105739 | BLD T20/S7 | SW6-T |
| HCE D20-A-L150-C20 | 20.00 | 60.0 | 150.00 | 18.80 | 20.00 | C | - | A | 0.33 | SR 1052964 | BLD T25/S7 | SW6-T |
| HCE D20-D-L200-C25 | 20.00 | 90.0 | 200.00 | - | 25.00 | C | 1.6 | D | 0.62 | SR 1052964 | BLD T25/S7 | SW6-T |
| HCE D25-A-L170-C25 | 25.00 | 70.0 | 170.00 | 23.00 | 25.00 | C | - | A | 0.57 | SR 1051666 | BLD T25/S7 | SW6-T |
| HCE D25-D-L250-C32 | 25.00 | 125.0 | 250.00 | - | 32.00 | C | 1.6 | D | 1.20 | SR 1051666 | BLD T25/S7 | SW6-T |
- For undercutting, use HTR inserts only
- The dimensions are for HCC inserts with RE=0.5 mm
- For user guide see pages 542-548
(1) C-Cylindrical
For inserts, see pages: HCC-QF (534)
Type A Type B, D
BHTA LH LH
DRVS THSZMS
HCE-MM DC DCONMS
Multifunction Endmills with a MULTI-MASTER Threaded LF Adaptation that Can Carry OAL Several Insert Geometries
| Designation | DC | OAL | LF | APMX | THSZMS | DCONMS | DRVS(1) | TQ | kg | |||
| HCE D12/.50-MMT08 | 12.00 | 28.00 | 20.00 | 8.10 | T08 | 11.50 | 10.0 | 15.0 | 0.01 | SR 34-540 | BLD T15/S7 | SW6-T |
| HCE D16/.62-MMT10 | 16.00 | 36.75 | 25.00 | 10.30 | T10 | 15.20 | 13.0 | 28.0 | 0.03 | SR 105739 | BLD T20/S7 | SW6-T |
| HCE D20/.75-MMT12 | 20.00 | 48.80 | 35.00 | 12.80 | T12 | 18.50 | 15.0 | 28.0 | 0.06 | SR 1052964 | BLD T25/S7 | SW6-T |
- For undercutting, use HTR inserts only
- The dimensions are for HCC inserts with RE=0.5 mm
- Do not apply lubricant to the MULTI-MASTER threaded connection
- For adaptation options, see page 44
- For user guide see pages 542-548
(1) Width across flats (wrench should be ordered separately)
For inserts, see pages: HCC-QF (534)
For holders, see pages: MM CAB (667) MM GRT (shanks) (86) MM S-A (stepped shanks) (84) MM S-A (straight shanks) (87) MM S-A-C# (86)
- MM S-A-HSK (609)
- MM S-A-N (85)
- MM S-A-SK (90)
- MM S-B (85° conical shanks) (87)
- MM S-D (89° conical shanks) (88)
- MM S-ER (89)
- MM S-ER-H (89)
- MM TS-A (86)