Каталог Iscar концевые фрезы со сменными пластинами 2022 - страница 17
Навигация
Каталог Iscar токарный инструмент
Инструменты для обработки отверстий Iscar 2026
Каталог Iscar токарные пластины ISO 2022
Каталог Iscar высокоточные развертки и метчики 2022
Каталог Iscar крепление инструмента
Каталог Iscar сверла ружейные и для глубокого сверления 2022
| T290 ELN-05 Endmills Carrying Tangentially Clamped Inserts | DC APMX | LH | OAL | DCONMS | ||||||
| Designation | DC | CICT(1) | OAL | LH | APMX | DCONMS | Shank(2) | kg | ||
| T290 ELN D08-01-C08-05 | 8.00 | 1 | 60.00 | 20.0 | 5.00 | 8.00 | C | 0.02 | SR 10503833 | T-7/51 |
| T290 ELN D10-02-C10-05 | 10.00 | 2 | 80.00 | 20.0 | 5.00 | 10.00 | C | 0.04 | SR 10503833-S | T-7/51 |
| T290 ELN D12-02-C12-05 | 12.00 | 2 | 80.00 | 20.0 | 5.00 | 12.00 | C | 0.06 | SR 10503833 | T-7/51 |
| T290 ELN D12-03-C12-05 | 12.00 | 3 | 80.00 | 20.0 | 5.00 | 12.00 | C | 0.07 | SR 10503833 | T-7/51 |
| T290 ELN D14-03-C14-05 | 14.00 | 3 | 80.00 | 20.0 | 5.00 | 14.00 | C | 0.08 | SR 10503833 | T-7/51 |
| T290 ELN D16-04-C16-05 | 16.00 | 4 | 80.00 | 22.0 | 5.00 | 16.00 | C | 0.10 | SR 10503833 | T-7/51 |
| T290 ELN D16-05-C16-05 | 16.00 | 5 | 80.00 | 22.0 | 5.00 | 16.00 | C | 0.10 | SR 10503833 | T-7/51 |
- For user guide see pages 542-548
(1) Number of inserts (2) C-Cylindrical
For inserts, see pages: T290 LNMT/LNHT 0502 (474)
| APMX | DRVS | THSZMS | |||||||||
| T290 ELN-MM-05 | DC | DCONMS | |||||||||
| Endmills with a MULTI-MASTER | |||||||||||
| Adaptation Carrying Tangentially Clamped Inserts | LF OAL | ||||||||||
| Designation | DC | CICT(1) | APMX | DCONMS | THSZM | S LF | OAL | DRVS(2) | kg | ||
| T290 ELN D10-02-MMT06-05 | 10.00 | 2 | 5.00 | 9.20 | T06 | 13.40 | 20.00 | 8.0 | 0.01 | SR 10503833-S | T-7/51 |
| T290 ELN D12-03-MMT08-05 | 12.00 | 3 | 5.00 | 11.00 | T08 | 16.00 | 24.00 | 10.0 | 0.01 | SR 10503833 | T-7/51 |
| T290 ELN D14-03-MMT08-05 | 14.00 | 3 | 5.00 | 13.00 | T08 | 16.06 | 24.00 | 10.0 | 0.01 | SR 10503833 | T-7/51 |
| T290 ELN D16-04-MMT10-05 | 16.00 | 4 | 5.00 | 14.95 | T10 | 19.25 | 31.00 | 13.0 | 0.03 | SR 10503833 | T-7/51 |
- Do not apply lubricant to the MULTI-MASTER threaded connection
- For adaptation see page 44
- For user guide see pages 542-548
(1) Number of inserts (2) Clamping wrench size
For inserts, see pages: T290 LNMT/LNHT 0502 (474)
For holders, see pages: MM CAB (667) MM CAB-T-T (91) MM GRT (shanks) (86) MM S-A (stepped shanks) (84) MM S-A (straight shanks) (87)
- MM S-A-C# (86)
- MM S-A-HSK (609)
- MM S-A-N (85)
- MM S-A-SK (90)
- MM S-B (85° conical shanks) (87)
- MM S-D (89° conical shanks) (88)
- MM S-ER (89)
- MM S-ER-H (89)
- MM TS-A (86)
| E90CN-M 90° Endmills with a FLEXFIT Threaded Connection Carryin CNMT/HT 0703 Inserts | g | DC APMX | LF 5.7 | OAL | DRVS | THSZMS | DCONMS | Rd° | |||||
| Designation | DC | CICT(1) | APMX(2) | LF | OAL | THSZMS | RMPX°(3 | ) DCONMS | DRVS(4) | TQ3(5) | kg | ||
| E90CN D16-2-M08-07-C | 16.00 | 2 | 4.00 | 30.00 | 47.50 | M08 | 5.0 | 13.00 | 13.0 | 20 | 0.03 | SR 34-505/LHG | T-8/53 |
| E90CN D20-3-M10-07-C | 20.00 | 3 | 4.00 | 30.00 | 50.00 | M10 | 3.5 | 18.00 | 16.0 | 29 | 0.05 | SR 34-505/LHG | T-8/53 |
| E90CN D25-4-M12-07-C | 25.00 | 4 | 4.00 | 35.00 | 57.00 | M12 | 2.5 | 21.00 | 17.0 | 33 | 0.09 | SR 34-505/LHG | T-8/53 |
- For adaptation see page 44
- For user guide see pages 542-548
- When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
Apply appropriate tightening torque to eliminate a gap between the mating faces. Estimated torque values are specified in the TQ_3 parameter (1) Number of inserts (2) Maximum recommended depth of cut for CNMT 070308-MM insert, APMX=2 mm for CNHT 070305 insert (3) Maximum ramping angle (4) Clamping wrench size (5) Tool tightening torque Nxm (lbfxin)
For inserts, see pages: CNHT/MT 07 (538)
For holders, see pages: BT-ODP (FLEXFIT) (314) C#-ODP (FLEXFIT) (314) CAB M-M (FLEXFIT) (312) DIN69871-ODP (315) ER-ODP (315)