Каталог Iscar дисковые фрезы и фрезерные пластины 2022 - страница 17
Навигация
Каталог Iscar крепление инструмента
Каталог Iscar инструмент для обработки отверстий
Каталог Iscar резьбонарезные фрезы
Каталог Iscar инструмента для сверления
Каталог Iscar решения для глубокого сверления
| DGSM-M-JHP Groove Milling and Slitting Small Diameter Cutters with FLEXFIT Threaded Adaptation | D | CONMS | D THSZMS OAL | LF RVS | DC | Bar Max | ||||||
| Designation | DC | CW | CDX | CICT(1) | DCONMS | THSZMS | LF | OAL | DRVS(2) | Insert | ||
| DGSM 16-2-M06-3Z-JHP | 16.00 | 2.00 | 3.70 | 3 | 10.00 | M06 | 9.65 | 24.15 | 8.0 | DGM 2002V | ESM 2-3 | MM KEY 8X5 |
| DGSM 16-3-M06-3Z-JHP | 16.00 | 3.00 | 3.70 | 3 | 10.00 | M06 | 8.30 | 22.50 | 8.0 | DGM 3002V | ESM 2-3 | MM KEY 8X5 |
| DGSM 18-2-M06-3Z-JHP | 18.00 | 2.00 | 4.70 | 3 | 10.00 | M06 | 9.65 | 24.15 | 8.0 | DGM 2002V | ESM 2-3 | MM KEY 8X5 |
| DGSM 18-3-M06-3Z-JHP | 18.00 | 3.00 | 4.70 | 3 | 10.00 | M06 | 9.80 | 24.00 | 8.0 | DGM 3002V | ||
| DGSM 22-2-M08-4Z-JHP | 22.00 | 2.00 | 5.70 | 4 | 12.00 | M08 | 8.65 | 26.15 | 10.0 | DGM 2002V | ||
| DGSM 22-3-M08-4Z-JHP | 22.00 | 3.00 | 5.70 | 4 | 12.00 | M08 | 9.30 | 26.50 | 10.0 | DGM 3002V |
(1) Number of inserts (2) Torque key size
For inserts, see pages: DGM-V (332)
For holders, see pages: BT-ODP (FLEXFIT) (314) CAB M-M (FLEXFIT) (312) DIN69871-ODP (315) ER-ODP (315) HSK A-ODP (FLEXFIT) (316)
- S M (312)
- S M-C-H (312)
Insertion Extraction
| THSZMS | LF OAL | |||||||||||
| DGSM-MM-JHP Groove Milling and Slitting | DCONMS | DC | Bar Max | |||||||||
| Small Diameter Cutters with MULTI-MASTER Threaded Adaptation | DRVS | |||||||||||
| Designation | DC | CW | CDX | CICT(1) | DCONMS | THSZM | S LF | OAL | DRVS(2) | Insert | ||
| DGSM 16-2-MMT06-3Z-JHP | 16.00 | 2.00 | 3.70 | 3 | 10.00 | T06 | 9.65 | 15.95 | 8.0 | DGM 2002V | ||
| DGSM 16-3-MMT06-3Z-JHP | 16.00 | 3.00 | 3.70 | 3 | 10.00 | T06 | 9.70 | 14.30 | 8.0 | DGM 3002V | ESM 2-3 | MM KEY 8X5 |
| DGSM 18-2-MMT06-3Z-JHP | 18.00 | 2.00 | 4.70 | 3 | 10.00 | T06 | 9.65 | 15.95 | 8.0 | DGM 2002V | ||
| DGSM 18-3-MMT06-3Z-JHP | 18.00 | 3.00 | 4.70 | 3 | 10.00 | T06 | 9.90 | 16.25 | 8.0 | DGM 3002V | ||
| DGSM 22-2-MMT08-4Z-JHP | 22.00 | 2.00 | 5.70 | 4 | 12.00 | T08 | 8.50 | 15.80 | 10.0 | DGM 2002V | ||
| DGSM 22-3-MMT08-4Z-JHP | 22.00 | 3.00 | 5.70 | 4 | 12.00 | T08 | 9.15 | 16.40 | 10.0 | DGM 3002V |
(1) Number of inserts (2) Torque key size
For inserts, see pages: DGM-V (332)
For holders, see pages: MM CAB (667) MM CAB-T-T (91) MM GRT (shanks) (86) MM S-A (stepped shanks) (84) MM S-A (straight shanks) (87)
- MM S-A-C# (86)
- MM S-A-HSK (609)
- MM S-A-N (85)
- MM S-A-SK (90)
- MM S-B (85° conical shanks) (87)
- MM S-D (89° conical shanks) (88)
- MM S-ER (89)
- MM S-ER-H (89)
- MM TS-A (86)
Insertion Extraction