Каталог Iscar державки и пластины для нарезания резьбы 2022 - страница 8
Навигация
Каталог Iscar сверла со сменной режущей частью 2022
Каталог Iscar новые продукты 2018
Каталог Iscar концевые фрезы со сменными пластинами 2022
Каталог Iscar инструмент для нарезания резьбы
Каталог Iscar отрезка 2022
Каталог Iscar торцевые фрезы 2022
±0.025 10 Ref. GEPI-WT 2.9 Ref. Precision Ground Double-Ended 8˚
Threading Inserts with a 55° CW PNA
| Partial Profile and a Chipformer | RE | BW |
| for 11.5 mm Bore Diameter |
NUT Dimensions Tough 1 Hard
55°
SCREW
| Designation | CW | RE | RETOL(1) | PNA | BW | TPN(2) | TPX(3) | TPIN(4) | TPIX(5) | ||
| GEPI 2.5-WT0.05 | 2.50 | 0.05 | 0.030 | 55.0 | 1.80 | 0.470 | 2.540 | 10.00 | 54.00 | • | • |
- Toolholder seat needs to be modified according to insert profile to ensure clearance
- Pitch max 0.167xD, TPI min D/6.0
(1) Corner radius tolerance (+/-) (2) Thread pitch minimum (mm) (3) Thread pitch maximum (mm) (4) Threads per inch minimum (5) Threads per inch maximum
For tools, see pages: AVC-GEAIR/L (346) E-GEHIR / E-GHIR (340) GEAIR/L (340) GEHIMR/L (337) GEHIMR/L-SC (337) GEHIR/L (338)
- GEHIR/L-SC (339)
- GEHSR (373)
- GEHSR/L-SL (372)
TIPI-WT
Double-Ended Internal Threading
Inserts with a 55° Partial
Profile and a Chipformer for
20 mm Min. Bore Diameter
NUT 55°
±0.025 5 8° 15.7 Ref. CW 55° RE
Dimensions Tough 1 Hard
SCREW
| Designation | CW | RE | RETOL(1) | TPN(2) | TPIX(3) | TPIN(4) | ||
| TIPI 3.4WT-0.10 | 3.40 | 0.10 | 0.030 | 0.950 | 27.00 | 8.00 | • | • |
| TIPI 5.4WT-0.20 | 5.40 | 0.20 | 0.030 | 1.670 | 15.00 | 5.00 | • |
- Toolholder seat needs to be modified according to insert profile to ensure clearance
- Pitch max 0.187xD, TPI min D/5.25 D=Diameter of thread (pitch max<=CW)
(1) Corner radius tolerance (+/-) (2) Thread pitch minimum (mm) (3) Threads per inch maximum (4) Threads per inch minimum
For tools, see pages: AVC-GAIR/L (347) GAIR/L (346) GHIR/L (W=1.9-6.4) (344) GHIR/L-SC (W=2-4.8) (345)
UMGR-A55 WF
Mini Indexable Inserts with
PNA 0.8
Whitworth Partial Profile
for Threading in 5.2 mm 0.1 and Larger Holes Right-hand shown NUT Dimensions 55°
SCREW
| Designation | WF | PNA | TPIX(1) | TPIN(2) | TPN(3) | TPX(4) | DMIN | |
| UMGR 4.0-A55 | 2.70 | 55.0 | 40.00 | 24.00 | 0.500 | 1.400 | 5.20 | • |
(1) Threads per inch maximum (2) Threads per inch minimum (3) Thread pitch minimum (mm) (4) Thread pitch maximum (mm)
For tools, see pages: MGUHR (411)