Каталог Iscar инструмента для сверления

1. Tool	2. Workpiece
Quantity............................................................................	(If possible, please attach a drawing)
Nominal diameter and tolerance ......................................	2.1 Material
Please fill in dimensions on the sketch below.	Material description (DIN material number or any
	other standard):
	L .........................................................................................

Ls LA Hardness and Properties: D d

2.2 Hole Type

Driver	Blind Hole	Drilling into Pre-hole		Angled Entry
Driver: for standard drivers please use codes	Drilling into Solid		Boring	Angled Exit

from HOLE MAKING TOOLS Metric Catalog. Drilling Depth mm Hole Tolerance

Grind:: Special (fill in the dimensions and angles below). Workpiece:: Stationary : Rotating Tool : Stationary : Rotating

3. Machine

	1 3.1 Technical Data
	bF
a	Machine Type....................................................................
_F 1
_	Power: ...................................... kW ...............................
1
_2
s 1
_3	3.2 Cutting Data:
s2
	Cutting Speed Vc .............. m/min ..................................
as	Revolutions Nmin ......... RPM, Nmax ......... RPM
exter nal Cuttnig Inter nal Cuttnig
	Feed Fmin..................... mm/rev
Edge Edge
	Fmax............. mm/rev ..........
s ................ _F ................ _ ................	Feed Rate VF ................. mm/min .................................
1= 1= 1=
s2= bF1= ................ _2= ................ ................	Coolant:

_3= ................ as= .................. a= ..................

Coolant Pressure: ................. Bar .................................

Coating: Sketch of drilling application

Type: Please circle the required type.

A B C D

E G H I

Note: It may be necessary to change several of the parameters that you indicated, based on our experience with your application.

Каталог Iscar инструмента для сверления - страница 17