Каталог Iscar инструмент для внутренней обработки - страница 6

Предыдущая страница Следующая страница

Навигация

GHPCOR/L

Perpendicular Square-Shank Tools for Use on the Cross Slide Units of Swiss-Type

and Automatic Machines

D1maxl1 L5Cutting Edge Height
A1fmax Tmax- d-d1 ClampaH2 h470h1 bRight-hand shown
Designationhbl1L5h4H2A1D1 maxTmax-afmaxdd1
GHPCOR/L 08-16-4-58.08.0102.0088.004.015.034.0026.016.0030.04.005.00
GHPCOL 08-25-4-58.08.0102.0088.004.015.034.0026.025.0030.04.005.00
GHPCOR 08-28-4-58.08.0102.0088.004.015.034.0026.028.0030.04.005.00
GHPCOR/L 10-16-4-510.010.0102.0088.002.018.034.0026.016.0030.04.005.00
GHPCOR/L 10-25-4-510.010.0102.0088.002.018.034.0026.025.0030.04.005.00
GHPCOR/L 12-16-4-612.012.0102.0088.00-18.034.0026.016.0030.04.006.00
GHPCOR 12-25-4-612.012.0102.0088.00-18.043.0026.025.0039.04.006.00
GHPCOR/L 16-16-4-616.016.0112.0098.00-22.035.0036.016.0031.04.006.00
GHPCOR/L 16-25-4-616.016.0112.0098.00-22.044.0036.025.0040.04.006.00
GHPCOR/L 16-30-7-816.016.0112.0098.00-22.049.0036.030.0045.07.008.00
  • PICCOCUT insert should not exceed A1 length.
  • Left-hand holders are available upon request.
  • Coolant tube adapter: KQ2L06-M5 (for 6 mm coolant tube)

Indexing from the top Indexing from the front

SpareParts
DesignationSide ClampScrewKeyPipeFitting
GHPCOR/L 08-16-4-5HED 08SR M4X14DIN912 12.9HW 3.0KQ2L06-M5
GHPCOL 08-25-4-5HED 08SR M4X14DIN912 12.9HW 3.0KQ2L06-M5
GHPCOR 08-28-4-5HED 08SR M4X14DIN912 12.9HW 3.0KQ2L06-M5
GHPCOR/L 10-16-4-5HED 10SR M4X14DIN912 12.9HW 3.0KQ2L06-M5
GHPCOR/L 10-25-4-5HED 10SR M4X14DIN912 12.9HW 3.0KQ2L06-M5
GHPCOR/L 12-16-4-6HED 12SR M4X14DIN912 12.9HW 3.0KQ2L06-M5
GHPCOR 12-25-4-6HED 12SR M4X14DIN912 12.9HW 3.0KQ2L06-M5
GHPCOR/L 16-16-4-6HED 16-4-6SR M4X14DIN912 12.9HW 3.0KQ2L06-M5
GHPCOR/L 16-25-4-6HED 16-4-6SR M4X14DIN912 12.9HW 3.0KQ2L06-M5
GHPCOL 16-30-7-8HED 16-7-8SR M4X14DIN912 12.9HW 3.0KQ2L06-M5
GHPCOR 16-30-7-8HED 16-7-8SR M4X14DIN912 12.9HW 3.0KQ2L06-M5