Каталог Iscar инструмент для внутренней обработки - страница 20
Навигация
Каталог Iscar инструментальные блоки
Фрезерные инструменты Iscar 2026
Каталог Iscar обработка канавок 2022
Каталог Iscar инструмент для нарезания резьбы
Токарные инструменты Iscar (часть 2) 2026
GIQR/L 11-15
Precision Ground Single-Ended Internal Deep Grooving and Turning Inserts
f l Ref
R
W
Tmax-r
Left-hand shown
Dimensions Recommended Machining Data
ap f turn f groove
| Designation | W±0.02 | R ±0.03 | Tmax-r | D min | l | f | (mm) | (mm/rev) (mm/rev) | ||
| GIQR/L 11-15-1.50-0.05 | 1.50 | 0.05 | 6.30 | 15.00 | 14.60 | 10.6 | O | 0.10-0.40 | 0.02-0.05 | 0.02-0.06 |
| GIQR/L 11-15-2.00-0.10 | 2.00 | 0.10 | 6.30 | 15.00 | 14.60 | 10.6 | O | 0.15-0.50 | 0.02-0.05 | 0.02-0.06 |
| GIQR/L 11-15-2.50-0.20 | 2.50 | 0.20 | 6.30 | 15.00 | 14.60 | 10.6 | O | 0.25-0.65 | 0.02-0.05 | 0.02-0.06 |
| GIQR/L 11-15-3.00-0.20 | 3.00 | 0.20 | 6.30 | 15.00 | 14.60 | 10.6 | O | 0.25-0.75 | 0.02-0.05 | 0.02-0.06 |
- Comply to retaining rings DIN 471/472.
- Can be used for groove milling by circular interpolation.
For tools, see pages: MG (B16) MGCH (B17).
Spare Parts
Designation Screw GIQR/L 11-15 SR M3.5-08134
GIQR/L 11-15-R
Precision Ground Single-Ended Full Radius Inserts,
for Deep Internal Grooving and Profiling
f l Ref
R
W
Tmax-r
Left-hand shown
Recommended Machining Dimensions Data
f turn f groove
ap (mm/ (mm/
| Designation | W±0.02 | R ±0.03 | Tmax-r | D min | f | l | (mm) | rev) | rev) | |||
| GIQR/L 11-15-2.00-R100 | 2.00 | 1.00 | 6.30 | 15.00 | 10.6 | 14.60 | O | 0.00-0.50 | 0.02-0.05 | 0.02-0.06 | ||
| GIQR/L 11-15-2.50-R125 | 2.50 | 1.25 | 6.30 | 15.00 | 10.6 | 14.60 | O | 0.00-0.65 | 0.02-0.05 | 0.02-0.06 | ||
| GIQR/L 11-15-3.00-R150 | 3.00 | 1.50 | 6.30 | 15.00 | 10.6 | 14.60 | O | 0.00-0.75 | 0.02-0.05 | 0.02-0.06 |
- Comply to retaining rings DIN 471/472.
- Can be used for groove milling by circular interpolation.
For tools, see pages: MG (B16) MGCH (B17).
Spare Parts
Designation Screw GIQR/L 11-15-R SR M3.5-08134