Каталог Iscar инструмент для мелкоразмерной обработки - страница 93
Навигация
Каталог Iscar дисковые фрезы и фрезерные пластины 2022
Каталог Iscar инструмент для внутренней обработки
Каталог Iscar инструмент для обработки алюминиевых колёс
Каталог Iscar державки и пластины для нарезания резьбы 2022
Каталог Iscar токарный инструмент для нарезания канавок
Каталог Iscar новые продукты 2018 
GIM-W-RA/LA
Parting Single-Sided Screw-Clamped Inserts with Central Ridged Chipformer for Alloy Steel
±0.1 7˚ 5 15.3 Ref. fa˚ M fa˚
Recommended Dimensions Tough ¥ Hard Machining Data
f groove
| Designation | W±0.05 | R±0.02 | fa° | M | (mm/rev) | |||||
| GIM 3S-15RA | 3.00 | 0.22 | 15.0 | 2.4 | O | 0.08-0.16 | ||||
| GIM 3-4R/LA | 3.00 | 0.25 | 4.0 | 2.4 | O | O | O | O | O | 0.08-0.16 |
| GIM 3-8R/LA | 3.00 | 0.25 | 8.0 | 2.4 | O | O | O | O | O | 0.08-0.16 |
| GIM 3.2-4R/LA | 3.20 | 0.22 | 4.0 | 2.4 | O | O | O | 0.08-0.16 | ||
| GIM 3.2-8R/LA | 3.20 | 0.22 | 8.0 | 2.4 | O | O | O | O | 0.08-0.16 | |
| GIM 4-4R/LA | 4.00 | 0.25 | 4.0 | 3.2 | O | O | O | 0.10-0.16 | ||
| GIM 4-8R/LA | 4.00 | 0.25 | 8.0 | 3.2 | O | O | O | O | 0.10-0.16 |
For tools, see pages: • CGHN-D (A25) • GHDR/L (short pocket) (A24) • GHGR/L (A25) • GHMPR/L (A23) • GHMR/L (A23).
GIM-UT
Single-Ended Parting and Grooving Screw-Clamped Inserts, for Low Feeds,
on CrNi Alloys and Low Carbon Steel
±0.1 7° 15.3 Ref. 5 W R M
Recommended Dimensions Machining Data
f groove
| Designation | W±0.03 | R±0.02 | M | (mm/rev) | |
| GIM 4.6UT | 4.60 | 0.60 | 3.8 | O | 0.03-0.10 |
For tools, see pages: • CGHN-D (A25) • GHDR/L (short pocket) (A24) • GHGR/L (A25) • GHMPR/L (A23) • GHMR/L (A23).