Каталог Iscar инструмент для мелкоразмерной обработки - страница 70
Навигация
Каталог Iscar дисковые фрезы и фрезерные пластины 2022
Каталог Iscar инструмент для внутренней обработки
Каталог Iscar инструмент для обработки алюминиевых колёс
Каталог Iscar державки и пластины для нарезания резьбы 2022
Каталог Iscar токарный инструмент для нарезания канавок
Каталог Iscar новые продукты 2018 
DGTR/L
Integral Shank Parting and Grooving Tools
l2 l2 h4 h h l2 Dmax
| b | A | W | ||
| l 1 | Right-hand shown |
| Designation | W min | W max | h | b | A | l1 | l2 | h4 | D max | Insert |
| DGTR/L 1010-2 | 1.90 | 2.50 | 10.0 | 10.0 | 1.80 | 150.00 | 29.0 | 6.6 | 35.0 | DG. 1.../DG. 2.. |
| DGTR/L 1212-2 | 1.90 | 2.50 | 12.0 | 12.0 | 1.80 | 150.00 | 29.0 | 6.6 | 35.0 (1) | DG. 1.../DG. 2.. |
| DGTR/L 1616-2 | 1.90 | 2.50 | 16.0 | 16.0 | 1.80 | 150.00 | 29.0 | 2.6 | 35.0 (1) | DG. 1.../DG. 2.. |
| DGTR/L 1212-3 | 3.00 | 3.18 | 12.0 | 12.0 | 2.50 | 150.00 | 29.0 | 6.6 | 35.0 (1) | DG. 1.../DG. 3.. |
| DGTR/L 1616-3 | 3.00 | 3.18 | 16.0 | 16.0 | 2.50 | 150.00 | 29.0 | 6.6 | 35.0 (1) | DG. 1.../DG. 3.. |
- Insert limit is Tmax=18 mm. If deeper penetration is required, the insert should be modified into single-ended by the user.
- DG..1.0 insert can be mounted into
pocket sizes 2 and 3. In that case the pocket width has to be modified (1) Dmax=43 mm when single-ended insert is used For inserts, see pages: DGN-LF/LFT (A66) DGN-MF (A65) DGN/DGNC/DGNM-C (A64) DGR/L-C DGRC/LC-C (A64) DGN/DGNM-J/JS/JT (A65) DGR/L-J/JS (A66) DGN-P (A68) DGN-UT/UA (A68) DGN-WP (A69) DGN-Z (A67) DGR-P (A69) DGR-WP (A70) DGR-Z/ZS (A67) GRIP (A19) GRIP (full radius) (A20).
Spare Parts
| Designation | Extractor |
| DGTR/L 1010-2 | EDG 33B |
| DGTR/L 1212-2 | EDG 33B |
| DGTR/L 1616-2 | EDG 33B |
| DGTR/L 1212-3 | EDG 33B |
| DGTR/L 1616-3 | EDG 33B |
* (Optional, should be ordered separately)
DGTR/L-B-D-TR
Reinforced Parting and Grooving Tools for Double-Ended DO-GRIP Inserts
DGTR/L..12B-1.5D... l2 Dmax A2 with DGN/R/L 1000 inserts
h h H
2 h4 L7 A T max=3 0.75
f b A
W l 1 Right -hand shown
| Designation | W min | W max | h | b | A | A2 | f | l1 | l2 | L7 | D max | H2 | h4 | Insert | |
| DGTR/L 12B-1.4D20-TR12 | 1.40 | 1.40 | 12.0 | 12.0 | 1.00 | 2.3 | 11.5 | 95.00 | 32.5 | 20.00 | 20.0 | 23.7 | 8.0 | DG. 14.. | |
| DGTL 12B-1.5D20-TR12 | 1.00 | 1.50 | 12.0 | 12.0 | 1.20 | 2.3 | 11.3 | 95.00 | 32.5 | 20.00 | 20.0 | 23.7 | 8.0 | DG. 1.../DG. 15.. | |
| DGTR 12B-1.5-D20-TR12 | 1.00 | 1.50 | 12.0 | 12.0 | 1.20 | 2.3 | 11.3 | 95.00 | 32.5 | 20.00 | 20.0 | 23.7 | 8.0 | DG. 1.../DG. 15.. |
- Important: 1.4 mm width inserts should be used only on tools for 1.4 mm specific width !!
- For Traub machines, model TNL 12/7
For inserts, see pages: DGN-P (A68) DGN/DGNM-J/JS/JT (A65) DGR-P (A69) DGR/L-J/JS (A66).
Spare Parts
Designation Screw Key
DGTR/L-B-D-TR SR 16-236 P T-15/5