Ручные и измерительные инструменты Hoffmann Group 2026 - страница 814

GBP 57 ​ Mortise chisel Made of octagonal steel bar, hardened and tempered. Blade uniformly through hardened; can be repeatedly reground without re-hardening. Head specially annealed to prevent splintering. Standard: Safety tested to DIN 7255. Material: Chrome vanadium air hardened steel, painted surface. Application: For chiselling between drill holes. Blade mm 10×2 10×3 74 3400 73U Mortise chisel eShop eShop Shaft length mm 125 ​ Rivet snap setter and closer Octagonal shank, bright finished head. Head specially annealed to prevent splintering. Standard: Safety tested to DIN 7255. 74 4610 – DIN 6434. 74 4710 – DIN 6435. Material: Chrome vanadium air hardened steel, painted surface. Number of tools 5 74 4610 73U Rivet snap setter set in a plastic clip eShop Content: Size 2; 3; 4; 5; 6 1 rivet snap setter each Number of tools 5 74 4610 74 4710 73U Rivet snap closer set in a plastic clip eShop Content: Size 2; 3; 4; 5; 6 1 rivet snap closer each 74 4710 ​Chisel and taper pin punch set Flat and cross-cut chisels for metal, and taper pin punches and centre punches with octagonal shanks, through hardened; chisels can be reground many times. Head specially annealed to prevent splintering. 74 5100 – Special quality = Highest possible point hardness − approx. 59 HRC − with exceptional toughness. Standard: 74 5200 – Safety tested to DIN 7255. Material: 74 5100 – Extra chrome vanadium steel, chrome-plated. 74 5200 – Chrome vanadium steel, painted surface. 74 Number of tools Chisel and taper pin punch set 6 11 74 5100_6 74 5100 in a plastic holder eShop eShop 73B special quality Content: 1 pc. each size 100×8; 1 pc. 120×12 mm Centre punch 120×10 mm Taper pin punch 1 pc. each ⌀ 4; 5 mm 1 pc. each ⌀ 2; 4; 5 mm Flat cold chisel 1 pc. each 165; 180 mm 1 pc. each 130; 165; 180 mm Cross-cut cold chisel 1 pc. 165 mm 1 pc. each 130; 165 mm Scriber, double-ended — 1 pc. 74 5100_11 Number of tools 6 74 5200 73U Chisel and taper pin punch set in a plastic holder eShop Content: 1 pc. each 125; 150 mm Flat cold chisel Cross-cut cold chisel 1 pc. 125 mm Taper pin punch 1 pc. each size 120×2; 150×3 mm Centre punch 1 pc. 120×4 mm 74 5200 Safety glasses can be found in Vol. 4 from No. 09 6200 096200_CLEAR 096400_CLEAR 096859_CLEAR 814