Ручные и измерительные инструменты Hoffmann Group 2026 - страница 303

GBP 57 Pictograms General DIN 80 m/s Fe,S,CI 7261 90° <0.1% 22.23mm M14 20-30° Maximum circumferential Bore ⌀ Recommended Vertical Iron, sulphur, To DIN M14 thread mounting speed 22.23 mm grinding angle cut chlorine content < 0.1 % Grinding wheel form Form 41 Form 42 Radial arrangement of Flat form Dished form Overlap between strips (straight) (depressed centre) strips Type of abrasive A ZA SiC CER D CBN Aluminium oxide Zirconium aluminium oxide Silicon carbide Ceramic grit Diamond Cubic boron nitride Material suitability Non- S/STL Steel ALU ferrous Cast CRP/ Metals iron GRP Non-ferrous Fibre-reinforced Stainless steel Steel Aluminium Cast iron metals plastics DIN 7261 51 Workshop file set The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. Bastard = Cut 1 These non-convex files have tooth profiles appropriate to each grade of file. 2nd cut = Cut 2 To protect the files, the set is arranged in a strong transparent roll-up nylon wallet. Smooth = Cut 3 Protected files cannot be contaminated and the cut is protected against damage; this ensures a consistently high removal rate, smooth file surfaces, and an extended working life. Application: Quality file for workshop use with long tool life and high removal rate. ​ 51 7100–​51 7600 ○ ● ● ● ○ ○ ● ● ● ● Sets of files with plastic handle, wooden handle ​ 51 7240 – With hardwood file handle. 51 7100/7200/7300 – With impact resistant plastic handles. Supplied with: 5-piece set of files with one each flat, 3-square, square, half-round and round file. flat 3- square square half round round 51 7100 / 7200 / 7300 Length without tang mm 200 250 300 Set of engineer’s files, 5 pieces, in a tool roll 51 7100 eShop eShop eShop 56B Cut 1 Set of engineer’s files, 5 pieces, in a tool roll 51 7200 eShop eShop eShop 56B Cut 2 Set of engineer’s files, 5 pieces, in a tool roll 51 7240 eShop eShop – 56B Cut 2, with wooden handle Set of engineer’s files, 5 pieces, in a tool roll 51 7300 eShop eShop eShop 51 7240 56B Cut 3 With impact resistant plastic handles. Supplied with: 6-piece set of files with one each flat file in bastard - 2nd cut - smooth in 200 mm and 300 mm length. flat 51 7600 Flat files set, 6 pieces, in a tool roll eShop 56B 51 7600 303