Режущие и зажимные инструменты Hoffmann Group 2026 - страница 1275

GBP 57 ​ T-slot scraper Sturdy steel tool for clearing T-slots. Size 2 – with 2-component handle Type 1 2 37 5512 T-slot scraper eShop eShop 35A for T-slot mm 14 – 20 22 – 32 _1 _2 ​ T-slot brush ■ Ergonomically shaped shock-resistant handle with guard. ■ Nylon bristles. ■ Laterally stabilised bristles. ■ 2 in 1: Clearing hook and brush head. ■ Sturdy T-slot brush made of steel, 14 mm wide. Type 1 37 5514 T-slot brush eShop 31O ​ Cover strips for T-slots Aluminium profile strip, 1 m long. Application: ■ Laborious cleaning of table slots is no longer necessary if empty slots are covered up with cover strips beforehand. ■ Cover strips can easily be removed after machining. Note: Can be cut to the required length using a fine saw blade. T-slot nominal size mm 12 14 16 18 20 22 24 28 36 37 5510 Cover strip for T-slot eShop eShop eShop eShop eShop eShop eShop eShop eShop 35A ​ Swarf hook with protective shield Sturdy swarf hook, conically tapered, plastic handle with protective shield ⌀ 135 mm. Length without handle mm 300 500 08 4500 Swarf hook with protective shield eShop eShop 08J ​ Clear View Disk With Insight KB, you can visually monitor the process in the machine room at all times. The machine becomes easier to operate and the entire work process becomes much more efficient and safer, and the scrap costs are reduced. ■ Beading effect due to a special coating. ■ Low installation height of 0.3 mm. ■ No screws required for installation, easy to apply thanks to a special adhesive layer. ■ Includes installation kit. Advantage: ■ The position on the machine’s protective screen can be freely selected. ■ Minimal installation work required. ■ Can be used flexibly, also suitable for curved screens. ■ Easy to replace. ■ No screws required for installation, easy to apply thanks to a special adhesive layer. ■ Production can start immediately after it has been installed. ■ Beading effect due to a special coating. ■ Made in Germany. Supplied with: Size SET – 3 disks (No. 358932 310), 1 squeegee, 1 cloth. Size 200; 310; 400 – 1 disk, 1 squeegee, 1 cloth. Note: The Clear View Disk is not intended for use in explosive atmospheres (ATEX). Dry machining and very sharp/hot chips, e.g. during high feed rate milling, can damage the surface and reduce its effectiveness. Type 200 310 SET 400 35 8982 Disk eShop eShop eShop eShop 34I Diameter mm 200 310 310 400 1275