Каталог Haimer инструментальная оснастка - страница 13

Solid Carbide End Mills C H A R A C T E R I S T I C S A N D A D VA N TA G E S AT A G L A N C E Use: Geometry: – For universal use in different materials – Unequal cutting edge end helix slitting for vibration (steel preferred) reduced machining – 2, 3, 4 and 5 cutting edges with different lengths Substrate: of cut based on application requirements – Submicron carbide grade with excellent impact – Cutting edge design (sharp, chamfer or radius) for strength and high T.R.S. maximum flexibility Tool Shank: – HAIMER cord cutting edge design for cutting force reduction – h5 shank tolerance – Neck for higher cutting depth – Safe-LockTM shank for pull out protection and – Power Mill end mills are fine balanced productivity improvement – Highest run-out accuracy (max. 5 µm, market com- Coatings: parison: 15 µm) –L  atest PVD coating for maximum wear protection, – Accurate overall length tolerance (+/- 0,05 mm), AlTiN-based HAIMER high-performance coating thus tool measurement is not always necessary –P  re and post treatment of tool surfaces for opti- – Diameter tolerance h9 mized chip removal Quality: – Consistent high and approved quality by 100% optical and dimensional inspection UNI Z4 – С ГЕОМЕТРИЕЙ – Special drop-protected packaging KORDEL UNI Z4 – CORD PROFILE C ПОЛНЫМ РАДИУСОМ BALL NOSE АЛЮМИНИЙ ALU UNI Z5 – С ФАСКОЙ И СТРУЖКОЛОМОМ UNI Z5 – CHAMFER WITH CHIP BREAKER Maximum metal removal rate and accuracy at the work piece only with a combination of HAIMER tool holding technology and HAIMER Power Mill! 13