Suitability and starting values for cutting speed (vc), feed (f) and depth of cut (ap). Refer to our Machining Calculator app for further calculations.
| | RE | | P | | M | | | K | | | N | | | S | | | H | |
| Product | | | | | | | | | | | | | | | | | | | |
| | | vc | f | ap | vc f | ap | vc | f | ap | vc | f | ap | vc | f | ap | vc | f | ap |
| | [mm] | [m/min] | [mm/tooth] | [mm] | [m/min] [mm/tooth] | [mm] | [m/min] | [mm/tooth] | [mm] | [m/min] | [mm/tooth] | [mm] | [m/min] | [mm/tooth] | [mm] | [m/min] [ | mm/tooth] | [mm] |
| 33° | 0,14 | 1 | | S | | | | | | | | | | | | | | |
| 19° | | M geomet | ry with | positive d | esign for ligh | ttom | edium m | achining. | | | | | | | | | | |
| TNGX 160608SR-M | 8215 | 0.80 | 230 | 0.15 | 3.0 | 135 0.14 | 3.0 | 215 | 0.15 | 3.0 | – | – | – | 55 | 0.11 | 2.4 | – | – | – |
| M6330 | 0.80 | 195 | 0.15 | 3.0 | 135 0.14 | 3.0 | – | – | – | – | – | – | 55 | 0.11 | 2.4 | – | – | – |
| M8310 | 0.80 | 245 | 0.15 | 3.0 | 120 0.14 | 3.0 | 230 | 0.15 | 3.0 | – | – | – | – | – | – | – | – | – |
| M8330 | 0.80 | 225 | 0.15 | 3.0 | 135 0.14 | 3.0 | 210 | 0.15 | 3.0 | – | – | – | 55 | 0.11 | 2.4 | – | – | – |
| M8340 | 0.80 | 205 | 0.15 | 3.0 | 120 0.14 | 3.0 | 190 | 0.15 | 3.0 | – | – | – | 50 | 0.11 | 2.4 | – | – | – |
| M8345 | 0.80 | 160 | 0.15 | 3.0 | 95 0.14 | 3.0 | – | – | – | – | – | – | 40 | 0.11 | 2.4 | – | – | – |
| M9325 | 0.80 | 285 | 0.15 | 3.0 | – – | – | 270 | 0.15 | 3.0 | – | – | – | – | – | – | – | – | – |
| M9340 | 0.80 | 260 | 0.15 | 3.0 | 155 0.14 | 3.0 | – | – | – | – | – | – | 65 | 0.11 | 2.4 | – | – | – |
| TNGX 160612SR-M | M8330 | 1.20 | 235 | 0.15 | 3.0 | 140 0.14 | 3.0 | 220 | 0.15 | 3.0 | – | – | – | 55 | 0.11 | 2.4 | – | – | – |
| M8340 | 1.20 | 215 | 0.15 | 3.0 | 125 0.14 | 3.0 | 200 | 0.15 | 3.0 | – | – | – | 50 | 0.11 | 2.4 | – | – | – |
| TNGX 160616SR-M | M8310 | 1.60 | 275 | 0.15 | 3.0 | 140 0.14 | 3.0 | 260 | 0.15 | 3.0 | – | – | – | – | – | – | – | – | – |
| M8330 | 1.60 | 250 | 0.15 | 3.0 | 150 0.14 | 3.0 | 235 | 0.15 | 3.0 | – | – | – | 60 | 0.11 | 2.4 | – | – | – |
| M8340 | 1.60 | 225 | 0.15 | 3.0 | 135 0.14 | 3.0 | 210 | 0.15 | 3.0 | – | – | – | 55 | 0.11 | 2.4 | – | – | – |
TNGX 16-FA
| IC | D1 | L | S | | 60° |
| [mm] | [mm] | [mm] | [mm] | RE | |
| 1606 | 9.525 | 4.4 | 16.5 | 6.58 | | |
L S Suitability and starting values for cutting speed (vc), feed (f) and depth of cut (ap). Refer to our Machining Calculator app for further calculations.
| | | vc | f | ap | vc | f | ap | vc | f | ap | vc | ap f vc | f | ap | vc | f | ap |
| | [mm] | [m/min] [mm/tooth] [mm] | | | [m/min] [mm/tooth] [mm] | | | [m/min] [mm/tooth] [mm] | | | [m/min] [mm/tooth] [mm] | [m/min] [mm/tooth] [mm] | | | [m/min] [mm/tooth] [mm] | | |
| | | F | | | | | | | | | | | | | | | |
| | 38° | | | | | | | | | | | | | | | | |
| | | FA geometry with highly positive design for fine finish to medium machining. | | | | | | | | | | | | | | | |
| TNGX 160604FR-FA | HF7 | 0.40 | – | – | – | – | – | – | – | – | – | 255 0.14 2.0 | – | – | – | – | – | – |
| M0315 | 0.40 | – | – | – | – | – | – | – | – | – | 585 0.14 2.0 | – | – | – | – | – | – |
| TNGX 160608FR-FA | HF7 | 0.80 | – | – | – | – | – | – | – | – | – | 300 0.14 2.0 | – | – | – | – | – | – |
| M0315 | 0.80 | – | – | – | – | – | – | – | – | – | 690 0.14 2.0 | – | – | – | – | – | – |
Общий каталог Dormer Pramet 2016
Каталог Dormer Pramet обработка отверстий 2021 - 2022
Каталог Dormer Pramet фрезерование 2021 - 2022
Общий каталог Dormer Pramet 2017
Каталог оснастка Dormer Pramet 2016
Каталог Dormer Pramet обработка резьбы 2021 - 2022