Брошюра Dormer Pramet новинки 2021 - страница 31
Навигация
Общий каталог Dormer Pramet 2016
Каталог Dormer Pramet обработка отверстий 2021 - 2022
Каталог Dormer Pramet фрезерование 2021 - 2022
Общий каталог Dormer Pramet 2017
Каталог оснастка Dormer Pramet 2016
Каталог Dormer Pramet обработка резьбы 2021 - 2022
5-Flute Solid Carbide End Mill with Chip Dividers
Short cutting length 5-flute design with chip dividers and unequal helix provides high rigidity for pocketing, trochoidal and profile milling. AlCrN coating increases service life and improves performance. For interpolating, ramping and profile milling.
FS
DC h9
Workpiece material group suitability and starting values for cutting speed (m/min). Letter code feed table can be found on page 22.
| P1.1 | P1.2 | P1.3 | P2.1 | P2.2 | P2.3 | P3.1 | P3.2 | P3.3 | P4.1 | P4.2 | M1.1 | M1.2 | M2.1 |
| 222 J | 248 J | 255 J | 189 J | 166 J | 147 I | 153 J | 123 I | 104 I | 90 I | 78 I | 128 I | 108 I | 113 I |
| M2.2 | M3.1 | M3.2 | K1.1 | K1.2 | K1.3 | K2.1 | K2.2 | K2.3 | K3.1 | K3.2 | K3.3 | K4.1 | K4.2 |
| 93 I | 105 I | 90 I | 218 J | 162 J | 122 J | 225 J | 183 J | 146 I | 198 J | 152 I | 123 I | 185 I | 139 I |
| K4.3 | K4.4 | K4.5 | K5.1 | K5.2 | K5.3 | S1.2 | S2.1 | S3.1 | S4.1 | ||||
| 102 I | 87 I | 72 I | 209 I | 156 I | 122 I | 76 I | 59 I | 44 G | 35 G |
DCON MS tolerance h6; RE ±0.01 mm.
| Product | DC | RE | DCON MS | APMX | OAL | NOF | LU | DN |
| [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | ||
| S771HB10.0 | 10.00 | 0.20 | 10.00 | 25.00 | 72.0 | 5 | 30.00 | 9.70 |
| S771HB12.0 | 12.00 | 0.20 | 12.00 | 30.00 | 83.0 | 5 | 38.00 | 11.70 |
| S771HB16.0 | 16.00 | 0.30 | 16.00 | 39.00 | 92.0 | 5 | 44.00 | 15.70 |
| S771HB20.0 | 20.00 | 0.30 | 20.00 | 48.00 | 104.0 | 5 | 54.00 | 19.70 |