Брошюра Dormer Pramet новинки 2021 - страница 29
Навигация
Общий каталог Dormer Pramet 2016
Каталог Dormer Pramet обработка отверстий 2021 - 2022
Каталог Dormer Pramet фрезерование 2021 - 2022
Общий каталог Dormer Pramet 2017
Каталог оснастка Dormer Pramet 2016
Каталог Dormer Pramet обработка резьбы 2021 - 2022
4-Flute Solid Carbide End Mill, Long Series
Long cutting length 4-flute design with unequal helix provides high rigidity for profile milling deep walls. TiSiN coating increases service life and improves performance. For plunging, ramping and profile milling.
NOF4=
DC h9 DIN 6535HA
APMX LU OAL
Workpiece material group suitability and starting values for cutting speed (m/min). Letter code feed table can be found on page 22.
| P1.1 | P1.2 | P1.3 | P2.1 | P2.2 | P2.3 | P3.1 | P3.2 | P3.3 | P4.1 | P4.2 | M1.1 | M1.2 | M2.1 |
| 148 I | 165 I | 170 I | 126 I | 111 I | 98 G | 102 I | 82 G | 69 G | 60 G | 52 G | 85 I | 72 I | 76 I |
| M2.2 | M3.1 | M3.2 | K1.1 | K1.2 | K1.3 | K2.1 | K2.2 | K2.3 | K3.1 | K3.2 | K3.3 | K4.1 | K4.2 |
| 62 I | 70 I | 60 I | 146 I | 108 I | 81 I | 150 I | 122 I | 97 G | 132 I | 102 I | 82 G | 123 G | 92 G |
| K4.3 | K4.4 | K4.5 | K5.1 | K5.2 | K5.3 | S1.2 | S2.1 | S3.1 | S4.1 | ||||
| 68 G | 58 I | 48 I | 139 G | 104 G | 81 G | 50 I | 39 G | 29 G | 23 G |
DCON MS tolerance h6; RE ±0.01 mm.
| Product | DC | RE | DCON MS | APMX | OAL | NOF | LU | DN |
| [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | ||
| S7684.0 | 4.00 | 0.10 | 6.00 | 19.00 | 75.0 | 4 | 32.00 | 3.70 |
| S7685.0 | 5.00 | 0.10 | 6.00 | 19.00 | 75.0 | 4 | 32.00 | 4.60 |
| S7686.0 | 6.00 | 0.10 | 6.00 | 25.00 | 75.0 | 4 | 32.00 | 5.50 |
| S7688.0 | 8.00 | 0.20 | 8.00 | 30.00 | 75.0 | 4 | 38.00 | 7.40 |
| S76810.0 | 10.00 | 0.20 | 10.00 | 40.00 | 100.0 | 4 | 50.00 | 9.20 |
| S76812.0 | 12.00 | 0.30 | 12.00 | 45.00 | 100.0 | 4 | 55.00 | 11.00 |
| S76816.0 | 16.00 | 0.30 | 16.00 | 65.00 | 125.0 | 4 | 75.00 | 15.00 |
| S76820.0 | 20.00 | 0.30 | 20.00 | 65.00 | 125.0 | 4 | 75.00 | 19.00 |