Short Adapter Short shrink fit adapter – without gripper groove For cylindrical tool shanks inch dimensions Coupling Item No. D5m dmt D21 D22 IC I1 I3 kg Size C3 C3-W-A391.19-06 048 1.260 0.25 0.965 0.787 1.417 1.890 1.732 0.20 C3-W-A391.19-07 048 1.260 0.312 0.965 0.787 1.417 1.890 1.732 0.19 C3-W-A391.19-09 048 1.260 0.375 1.063 0.886 1.614 1.890 1.732 0.22 C3-W-A391.19-12 048 1.260 0.5 1.063 0.886 1.811 1.890 1.732 0.19 C3-W-A391.19-15 056 1.260 0.625 – 1.063 1.929 2.205 – 0.27 C4 C4-W-A391.19-06 049 1.575 0.25 0.965 0.787 1.417 1.929 1.732 0.26 C4-W-A391.19-07 049 1.575 0.312 0.965 0.787 1.417 1.929 1.732 0.26 C4-W-A391.19-09 049 1.575 0.375 1.122 0.945 1.614 1.929 1.732 0.30 C4-W-A391.19-12 049 1.575 0.5 1.122 0.945 1.811 1.929 1.732 0.28 C4-W-A391.19-15 054 1.575 0.625 1.272 1.063 1.929 2.126 1.929 0.33 C5 C5-W-A391.19-06 050 1.969 0.25 0.965 0.787 1.417 1.969 1.732 0.38 C5-W-A391.19-07 050 1.969 0.312 0.965 0.787 1.417 1.969 1.732 0.37 C5-W-A391.19-09 050 1.969 0.375 1.122 0.945 1.614 1.969 1.732 0.42 C5-W-A391.19-12 050 1.969 0.5 1.122 0.945 1.811 1.969 1.732 0.40 C5-W-A391.19-15 055 1.969 0.625 1.272 1.063 1.929 2.165 1.929 0.45 C6 C6-W-A391.19-06 052 2.480 0.25 0.965 0.787 1.417 2.047 1.732 0.61 C6-W-A391.19-07 052 2.480 0.312 0.965 0.787 1.417 2.047 1.732 0.60 C6-W-A391.19-09 052 2.480 0.375 1.122 0.945 1.614 2.047 1.732 0.65 C6-W-A391.19-12 052 2.480 0.5 1.122 0.945 1.811 2.047 1.732 0.63 Note: C6-W-A391.19-15 057 2.480 0.625 1.272 1.063 1.929 2.244 1.929 0.68 Without adjustment screw. Dimensions, inch Note: The tolerance of the cutting tool shank diameter must be h6 or better. The cylindrical tool shank should be cleaned and deburred before mounting into the adapter. Shrink fit heating equipment The shrink fit adapters depend upon applying heat to expand the adapter. When cooled, the adapter contracts to grip around the tool shank. Please check if your induction heating equipment can accept the special dimensions of the above short shrink fit adapters. For guaranteed function, optimal tool performance, and for safe and easy handling of the clamping process, it is recommended that Bilz Power Clamp induction heating equipment for short adapters is used. It is required to follow the instruction from the induction hea- ting equipment producer. Further information is available at www.bilz.com. 8 © WTO GmbH I Subject to change without notice