Основной каталог Winstar 2021 - страница 273

Предыдущая страница Следующая страница

Навигация

Solid Carbide EndmillsMilling Solid Carbide Endmills Recommended Cutting Conditions Table 074 A100 Seires ENSSC1 Material Aluminum Application Slot Milling Vc 150 ~ 250 m/min Dia (mm) RPM Feed (mm/min) fz (mm/tooth) ap (mm) 4 15000 5000 0.33 0.5×d 6 10000 5000 0.50 0.5×d 8 8400 4000 0.48 0.5×d 10 6700 4000 0.60 0.5×d 12 5000 4000 0.80 0.5×d Table 075 A100 Seires ENSSP1 Material Aluminum Application Side Milling Vc 150 ~ 250 m/min Dia (mm) RPM Feed (mm/min) fz (mm/tooth) ap (mm) ae (mm) 4 15000 5000 0.33 1×d 0.3×d 6 10000 5000 0.50 1×d 0.3×d 8 8400 4000 0.48 1×d 0.3×d 10 6700 4000 0.60 1×d 0.3×d 12 5000 4000 0.80 1×d 0.3×d 1.Use as highly rigid and accurate machine as possible. 2.If the rpm available is lower than the recommend condition, please reduce the feed rate to the same ratio. 3.Use long shank type please reduce the rpm and feed rate. 4.The Feed and RPM may be changed depending on the M/C conditions ,lubricating and cooling system. A268