Каталог Widia инструментальная оснастка - страница 15

• WID_TOOLINGSYSTEMS10_G004_G005.qxp.pdf
• WID_TOOLINGSYSTEMS10_G006_G007.qxp
• WID_TOOLINGSYSTEMS10_G008_G009.qxp
• WID_TOOLINGSYSTEMS10_G010_G011.qxp

KM™ Quick Change Selection Guide KM Today All KM Quick Change tooling is made from H13 high-strength steel and comes The addition of the ATC configuration and data carrier capability provides in a silver satin finish. After the parts are heat treated, qualified pads are machined machine tool builders with one standard KM design. Integrating these into the part, which increases the repeatability of the clamping mechanism. components also enables customers to use data carriers to record tool KM is an ISO standard (26622). offsets and tool life information on the tool. 1 2 KM-TS Standardized System 1. Addition of ATC configuration and data carrier capability: a. Provides machine tool builders with one standard KM design. b. Enables customers to use data carriers to record tool offsets and tool life information on the tool. 2. H13 high-strength steel, silver satin finish. 3. Qualification after heat-treat process: 3 a. Heat-treated, qualified pads are machined into the part, increasing the repeatability. b. Qualification of the ball tracks after heat treat. KM Specific Systems KM63XMZ™ — Designed and used exclusively on Mazak® INTEGREX® KM80ATC™ — Designed and used on Giddings & Lewis™ VTLs. Mark IV Series, i-Series, and J-Series machines. KM63XMZ KM80ATC ® ® WWW.WIDIA.COM A5