Каталог Widia all star 2020 - страница 199

• TABLE OF CONTENTS
• INDEXABLE MILLING
• 0º/90º SHOULDER MILLS
• 90° HIGH-SPEED CUTTING MILLS
• FACE MILLS
• HIGH-FEED MILLS
• COPY MILLS
• SOLID END MILLING
• HIGH-PERFORMANCE SOLID CARBIDE END MILLS
• GENERAL PURPOSE SOLID CARBIDE END MILLS
• HOLEMAKING
• SOLID CARBIDE DRILLS
• MODULAR DRILLS
• INDEXABLE DRILLS
• TAPPING
• TURNING
• HIGH-PERFORMANCE INSERTS
• GROOVING & CUT-OFF
• Informational Icons Guide
• Material Overview • DIN

TURNINGTAPPINGHOLEMAKINGSOLID END MILLINGINDEXABLE MILLING General Purpose Solid Carbide End Mills • Roughing/Finishing Application Data • Series D014 2528 4014 4024 • Metric Side Milling (A) TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A). Cutting Speed A — vc D1 — Diameter Material m/min Group ap ae min max mm 2,0 3,0 4,0 5,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0 0 Ap1 max 0,1 x D 150 – 200 fz 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114 1 Ap1 max 0,1 x D 150 – 200 fz 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114 P 2 Ap1 max 0,1 x D 140 – 190 fz 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114 3 Ap1 max 0,1 x D 120 – 160 fz 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101 4 Ap1 max 0,1 x D 90 – 150 fz 0,010 0,016 0,021 0,027 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088 M 1 Ap1 max 0,1 x D2Ap1 max0,1 x D9060––11580fzfz 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,1010,0090,0140,0190,0240,0290,0400,0480,0560,0630,0700,0760,081 K 1 Ap1 max 0,1 x D 1202Ap1 max0,1 x D110––150140fzfz0,0140,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,1140,0110,0170,0230,0300,0360,0500,0610,0700,0790,0870,0950,101 NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions.For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters. Application Data • 4004 Series • Metric Side Milling (A)and Slotting (B)TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).For slotting (B), reduce fz by 20%. Cutting Speed A B — Vc D1 — Diameter Material m/min Group ap ae ap min max mm 1,0 2,0 3,0 4,0 5,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0 0 Ap1 max 0,1 x D 0,5 x D 150 – 200 fz 0,007 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114 1 Ap1 max 0,1 x D 0,5 x D 150 – 200 fz 0,007 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114 P 2 Ap1 max 0,1 x D 0,5 x D 140 – 190 fz 0,007 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114 3 Ap1 max 0,1 x D 0,5 x D 120 – 160 fz 0,006 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101 4 Ap1 max 0,1 x D 0,5 x D 90 – 150 fz 0,005 0,010 0,016 0,021 0,027 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088 M 1 Ap1 max 0,1 x D2Ap1 max0,1 x D0,5 x D0,5 x D90–115fz0,006 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,10160–80fz0,0050,0090,0140,0190,0240,0290,0400,0480,0560,0630,0700,0760,081 K 1 Ap1 max 0,1 x D2Ap1 max0,1 x D0,5 x D0,5 x D120–150110–140fzfz0,0070,0140,0210,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,1140,0060,0110,0170,0230,0300,0360,0500,0610,0700,0790,0870,0950,101 NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on greater than 12mm diameters. = A LL-STAR PORTFOLIO PRODUCT. ALL-STAR PRODUCTS ARE PROVEN SOLUTIONS THAT ARE ALWAYS AVAILABLE. widia.com B77