Каталог Tungaloy глубокое сверление 2 - страница 11

1122 DC (DCN-DCXh6) DCONMS UTE type drill head Brazed drill head with external 2-start or 4-start thread for single tube system (STS), tool diameter ø12.6 - ø20 mm, CICT = 1 H (Wrench size) Cutting edge OAL P Steel M Stainless K Cast iron N Non-ferrous S Superalloys : First choice Standard products H Hard materials : Second choice Coated Drill tube Designation DC OAL DCONMS H Designation Dia. (mm) UTE-0094-1 12.90 12.9 ST0094 11 40 9.6 10 䖃: Line up Non-standard products (to be supplied on request) When ordering ISO classifications for grades UTE-0094-1 xx.xx 1122 ISO areaGrade510152025303540 1122 Drill head Diameter (mm) Grade 3112 3112 e.g. Designation for tool diameter ø12.92 mm: UTE-0094-1 12.92 1122 3112 3132 3132 Designation DCN DCX Drill tube OAL DCONMS H Designation Dia. (mm) UTE-0094-1 xx.xx 12.6 12.92 ST0094 11 40 9.6 10 UTE-0094-2 xx.xx 12.93 12.99 ST0094 11 40 9.6 10 UTE-0094-3 xx.xx 13 13.25 ST0094 11 40 9.6 10 UTE-0094-4 xx.xx 13.26 13.6 ST0094 11 40 9.6 10 UTE-0095-1 xx.xx 13.61 13.93 ST0095 12 40 10.6 11 UTE-0095-2 xx.xx 13.94 13.99 ST0095 12 40 10.6 11 UTE-0095-3 xx.xx 14 14.26 ST0095 12 40 10.6 11 UTE-0095-4 xx.xx 14.27 14.6 ST0095 12 40 10.6 11 UTE-0096-1 xx.xx 14.61 14.93 ST0096 13 40 11.6 12 UTE-0096-2 xx.xx 14.94 15.26 ST0096 13 40 11.6 12 UTE-0096-3 xx.xx 15.27 15.59 ST0096 13 40 11.6 12 UTE-0097-1 xx.xx 15.6 15.96 ST0097 14 40 12.6 13 UTE-0097-2 xx.xx 15.97 16.32 ST0097 14 40 12.6 13 UTE-0097-3 xx.xx 16.33 16.7 ST0097 14 40 12.6 13 UTE-0098-1 xx.xx 16.71 17.03 ST0098 15 40 13.6 14 UTE-0098-2 xx.xx 17.04 17.36 ST0098 15 40 13.6 14 UTE-0098-3 xx.xx 17.37 17.7 ST0098 15 40 13.6 14 UTE-0099-1 xx.xx 17.71 18.09 ST0099 16 40 14.5 15 UTE-0099-2 xx.xx 18.1 18.48 ST0099 16 40 14.5 15 UTE-0099-3 xx.xx 18.49 18.9 ST0099 16 40 14.5 15 UTE-0000-1 xx.xx 18.91 19.26 ST0000 17 40 15.5 16 UTE-0000-2 xx.xx 19.27 19.62 ST0099 17 40 15.5 16 UTE-0000-3 xx.xx 19.63 20 ST0099 17 40 15.5 16 UTE Drill head : ø12.6 mm - ø15.59 mm, External 2-start thread UTE Drill head : ø15.6 mm - ø20 mm, External 4-start thread Reference pages: Standard cutting conditions → 20, Drill tube (STS) → 16 Tungaloy 11