Каталог Tungaloy глубокое сверление 1 - страница 10

DC DCONMS TRI-FINE STS-EX Indexable head with external 4-start thread for single tube system (STS) LF OAL Standard products Drill tube Designation DC Designation Dia. (mm) OAL LF DCONMS Insert Guide pad FNTR-0097S-16.00 16.00 ST0097 14 57 55 12.6 TOHT08... GP06-075, GP06-20-075-DC FNTR-0098S-17.00 17.00 ST0098 15 57 55 13.6 TOHT08... GP06-075, GP06-20-075-DC FNTR-0000S-20.00 20.00 ST0000 17 59 56 15.5 TOHT09... GP06-085, GP06-20-085-DC FNTR-00S-21.00 21.00 ST00 18 63 60 16 TOHT10... GP06-085, GP06-20-085-DC FNTR-01S-22.00 22.00 ST01 20 69 65.5 18 TOHT11... GP06-100, GP06-20-100-DC FNTR-01S-24.00 24.00 ST01 20 69 65.5 18 TOHT11... GP06-100, GP06-20-100-DC FNTR-02S-25.00 25.00 ST02 22 69 65.5 19.5 TOHT11... GP06-100, GP06-20-100-DC FNTR-02S-25.40 25.40 ST02 22 69 65.5 19.5 TOHT12... GP06, GP06-20-120-DC FNTR-02S-26.00 26.00 ST02 22 69 65.5 19.5 TOHT12... GP06, GP06-20-120-DC FNTR-03S-28.00 28.00 ST03 24 69 65.5 21 TOHT12... GP06, GP06-20-120-DC Non-standard products (to be supplied on request) When ordering FNTR-**S - xx.xx Drill head Diameter (mm) e.g. Designation for tool diameter ø16.5 mm: FNTR-0097S-16.50 Drill tube Designation DCN DCX OAL LF DCONMS Insert Guide pad Designation Dia. (mm) FNTR-0097S-xx.xx 16.00 16.70 ST0097 14 57 55 12.6 TOHT08... GP06-075, GP06-20-075-DC FNTR-0098S-xx.xx 16.71 17.70 ST0098 15 57 55 13.6 TOHT08... GP06-075, GP06-20-075-DC FNTR-0099S-xx.xx 17.71 18.00 ST0099 16 59 56 14.5 TOHT09... GP06-075, GP06-20-075-DC FNTR-0099S-xx.xx 18.01 18.90 ST0099 16 59 56 14.5 TOHT09... GP06-085, GP06-20-085-DC FNTR-0000S-xx.xx 18.91 20.00 ST0000 17 59 56 15.5 TOHT09... GP06-085, GP06-20-085-DC FNTR-00S-xx.xx 20.01 21.80 ST00 18 63 60 16 TOHT10... GP06-085, GP06-20-085-DC FNTR-01S-xx.xx 21.81 24.10 ST01 20 69 65.5 18 TOHT11... GP06-100, GP06-20-100-DC FNTR-02S-xx.xx 24.11 26.40 ST02 22 69 65.5 19.5 TOHT11... GP06-100, GP06-20-100-DC FNTR-03S-xx.xx 26.41 28.00 ST03 24 69 65.5 21 TOHT12... GP06, GP06-20-120-DC Reference pages: Spare parts → 012, Inserts → 013, Guide pads → 014, Standard cutting conditions → 015, Drill tube (STS) → 062 010 www.tungaloy.com