Заказ инструмента: http://steelcam.org 8 (343) 382-52-03 | sales@sverla-ekb.ru Materials Cross Reference Chart Stainless Steels / Refractory PH Steels Hardness HRB HRC Rm N/mm2 Fe Ni Cr Co Mo W Si Mn C Al Ti Li P S Mg Zn Cu Others HB Stainless Steels 58HRc 55HRc 1200 6.00 15.50 1.50 1.00 1.50 0.05 0.04 0.02 34HRC 1070 0.2-0.8 9.8-11.2 0.5-1.0 0.7 0.1-0.7 0.6-1.15 0.06-0.11 1300 Materials Cross Reference 500-700 60HRC 90HRB 600 57 12.00 22.00 2.30 0.50 5.00 0.03 0.02 0.02 Stainless Steel Refractory PH 1300 8.00 13.00 2.20 0.10 0.20 0.05 0.01 0.01 <1400 4.50 14.80 0.50 0.50 0.03 0.02 0.02 3.50 <1620 7.00 15.00 2.50 0.50 0.50 0.05 0.02 0.02 <1380 4.00 16.30 0.50 0.50 0.04 0.02 0.02 4.00 <1560 7.00 17.00 0.50 0.50 0.05 0.02 0.02 500-750 14.00 23.50 2.00 1.50 0.20 0.04 0.04 500-700 500-750 20.50 25.00 0.75 2.00 0.15 0.05 0.03 19.0/22.0 23.0/26.0 - 1.50/3.00 2.5 0.25 0.045 0.03 390-590 38.00 18.80 1.75 1.00 0.40 0.05 0.03 450-650 0.50 12.00 0.50 1.00 0.08 0.04 0.03 520-720 25.00 1.00 1.00 0.12 0.04 0.03 450-680 950-1300 440-640 900-1100 500-700 130-1100 400-600 800-1300 Material Guide – Key to Recommended Inserts Material Designation P Unalloyed Steels P Alloyed Steels M Stainless Steels M PH Stainless K Cast Irons N Aluminum & Alloys S High Temp. Alloys H Hard Materials www.kennametal.com D17