Общий каталог SGS 2021 - страница 28

FRACTIONAL Z-Carb-HPR 37° POS 5 TOLERANCES (inch) ≠ 1/8–1/4 DIAMETER DC = +0.0000/–0.0012 DCON = h6 RE = +0.0000/–0.0020 >1/4–3/8 DIAMETER DC = +0.0000/–0.0016 LFAPMX DCON = h6 Z5 • RE = +0.0000/–0.0020>3/8–1 DIAMETER Z5CR DC DCON DC = +0.0000/–0.0020NCDDCON = h6 FRACTIONAL SERIES RE RE = +0.0000/–0.0020 • An ideal balance of helix, inch EDP NO. indexing, flute depth, NON- rake and relief CUTTING TI-NAMITE-A TI-NAMITE-M CUTTING LENGTH OVERALL SHANK CORNER CENTER TI-NAMITE-A TI-NAMITE-A (TA) TI-NAMITE-M TI-NAMITE-M (TM) • Variable indexing for DIAMETER OF CUT LENGTH DIAMETER RADIUS DIAMETER (TA) (TA) W/INTERNAL (TM) (TM) W/INTERNAL chatter supression and DC APMX LF DCON RE NCD W/FLAT COOLANT W/ FLAT COOLANT patented edge geometryfor shearing and strength1/81/41-1/2 1/8 – 0.0440 38500 – – 37000 – – • Chatter-free geometry 1/8 1/4 1-1/2 1/8 0.010 0.0440 38771 – – 38770 – – allows deep cutting andhigh speed machining1/81/4 1-1/2 1/8 0.015 0.0440 38525 – – 37001 – – • Central coolant hole 1/8 1/4 1-1/2 1/8 0.030 0.0440 38773 – – 38772 – – delivers coolanteffectively to the cutting1/83/8 1-1/2 1/8 – 0.0440 37180 – – 37002 – – zone enhancing chipremoval when pocketing1/83/8 1-1/2 1/8 0.010 0.0440 38775 – – 38774 – – or slotting 1/8 3/8 1-1/2 1/8 0.015 0.0290 37181 – – 37003 – – • Excels at roughing,ramping, high speed1/8 3/8 1-1/2 1/8 0.030 0.0290 38777 – – 38776 – – machining and finishing 3/16 5/16 2 3/16 – 0.0660 38501 – – 37004 – – in a variety of materials • Enhanced corner 3/16 5/16 2 3/16 0.010 0.0660 38779 – – 38778 – – geometry with tight 3/16 5/16 2 3/16 0.015 0.0660 38526 – – 37005 – – tolerance corner radii • Recommended for 3/16 5/16 2 3/16 0.030 0.0660 38781 – – 38780 – – materials ≤ 45 HRc 3/16 1/2 2 3/16 – 0.0660 37182 – – 37006 – – (≤ 420 Bhn) 3/16 1/2 2 3/16 0.010 0.0660 38783 – – 38782 – – 3/16 1/2 2 3/16 0.015 0.0660 37183 – – 37007 – – STEELS 3/16 1/2 2 3/16 0.030 0.0660 38785 – – 38784 – – STAINLESS STEELS 1/4 3/8 2-1/2 1/4 – 0.0880 38502 – – 37008 – – 1/4 3/8 2-1/2 1/4 0.010 0.0880 38787 – – 38786 – – CAST IRON 1/4 3/8 2-1/2 1/4 0.015 0.0880 38527 – – 37009 – – HIGH TEMP ALLOYS 1/4 3/8 2-1/2 1/4 0.030 0.0880 38528 – – 37010 – – TITANIUM 1/4 3/8 2-1/2 1/4 0.060 0.0750 38789 – – 38788 – – HARDENED STEELS 1/4 3/8 2-1/2 1/4 0.090 0.0880 38791 – – 38790 – – 1/4 1/2 2-1/2 1/4 – 0.0880 37184 – – 37011 – – For patent 1/4 1/2 2-1/2 1/4 0.010 0.0880 38793 – – 38792 – – information visit www.ksptpatents.com 1/4 1/2 2-1/2 1/4 0.015 0.0880 37185 – – 37012 – – 1/4 1/2 2-1/2 1/4 0.030 0.0880 37186 – – 37013 – – 1/4 1/2 2-1/2 1/4 0.060 0.0750 38795 – – 38794 – – 1/4 1/2 2-1/2 1/4 0.090 0.0880 38797 – – 38796 – – continued on next page 28 END MILLS wwwE.kNyDoMceILraLS-sgstool.com