Общий каталог SGS 2021 - страница 244

FRACTIONAL & METRIC Hi-PerCarb® 32° 145° 2 OAL LCF LS LU TOLERANCES (inch) DC DCON ≤.1181 DIAMETER 135 5xD DC = +.00008/+.00047DCON =h6 FRACTIONAL & METRIC SERIES >.1181–.2362 DIAMETER • Double margin design inch & mm EDP NO. DC = +.00016/+.00063 improves accuracy and CUTTING DECIMAL METRIC TAP SIZE SHANK OVERALL FLUTE CLEARED SHANK Ti-NAMITE-Asurface finish along withDIAMETEREQUIV.EQUIV.REFERENCEDIAMETERLENGTHLENGTHLENGTHLENGTH(AlTiN)DCON =h6 increased strength for DC ONLY DCON OAL LCF LU LS >.2362–.3937 DIAMETER aggressive drilling 10,0 mm 0.3937 10,0 103,0 61,0 49,0 40,0 64174 DC = +.00024/+.00083 • Specialized self-centering notched pointX0.3970 10.08 7/16-24 1/2 4-11/16 2-3/4 2-23/64 1-49/64 52352 DCON = h6 eliminates the need for 10,1 mm 0.3976 12,0 118,0 71,0 56,0 45,0 64175 >.3937–.7087 DIAMETER spot drilling decreasing 10,2 mm 0.4016thrust and deflection 12,0 118,0 71,0 56,0 45,0 64176 DC = +.00028/+.00098 • Engineered edge Y 0.4040 10.26 7/16-28 1/2 4-11/16 2-3/4 2-23/64 1-49/64 52353 DCON = h6 protection improves edge 10,3 mm 0.4055 12,0 118,0 71,0 56,0 45,0 64177 >.7087–1.1811 DIAMETER strength and reduces 13/32 0.4062 10.32edge fatigue allowing for1/2 4-11/16 2-3/4 2-23/64 1-49/64 51528 DC = +.00031/+.00114 increased feed rates 10,4 mm 0.4095 12,0 118,0 71,0 56,0 45,0 64178 DCON = h6 • Recommended for Z 0.4130 10.49 1/2 4-11/16 2-3/4 2-23/64 1-49/64 52354 materials ≤ 56 HRc(≤ 577 Bhn) 10,5 mm 0.4134 M12 X 1,5 12,0 118,0 71,0 56,0 45,0 64179 TOLERANCES (mm) 10,6 mm 0.4173 12,0 118,0 71,0 56,0 45,0 64180 ≤3 DIAMETER 10,7 mm 0.4213 12,0 118,0 71,0 56,0 45,0 64181 DC = + 0, 0 0 2 /+ 0, 012 27/64 0.4219 10.72 1/2-13 1/2 4-11/16 2-3/4 2-23/64 1-49/64 51529 DCON = h6 10,8 mm 0.4252 M12 X 1,25 12,0 118,0 71,0 56,0 45,0 64182 >3–6 DIAMETER 10,9 mm 0.4291 12,0 118,0 71,0 56,0 45,0 64183 DC = +0,004/+0,016 11,0 mm 0.4331 12,0 118,0 71,0 56,0 45,0 64184 DCON = h6 11,1 mm 0.4370 M12 X 1 12,0 118,0 71,0 56,0 45,0 64185 >6–10 DIAMETER 7/16 0.4375 11.11 1/4-18 NPT 1/2 4-11/16 2-3/4 2-23/64 1-49/64 51530 DC = +0,006/+0,021 11,2 mm 0.4409 12,0 118,0 71,0 56,0 45,0 64186 DCON = h6 11,25 mm 0.4429 12,0 118,0 71,0 56,0 45,0 64187 >10–18 DIAMETER 11,3 mm 0.4449 12,0 118,0 71,0 56,0 45,0 64188 DC = +0,007/+0,025 11,4 mm 0.4488 12,0 118,0 71,0 56,0 45,0 64189 DCON = h6 11,5 mm 0.4528 M12 X 0,5 12,0 118,0 71,0 56,0 45,0 64190 >18–30 DIAMETER 29/64 0.4531 11.51 1/2-20 1/2 4-11/16 2-3/4 2-23/64 1-49/64 51531 DC = +0,008/+0,029 11,6 mm 0.4567 12,0 118,0 71,0 56,0 45,0 64191 DCON = h6 11,7 mm 0.4606 12,0 118,0 71,0 56,0 45,0 64192 11,8 mm 0.4646 12,0 118,0 71,0 56,0 45,0 64193 STEELS 11,9 mm 0.4685 12,0 118,0 71,0 56,0 45,0 64194 15/32 0.4688 11.91 1/2-28 1/2 4-11/16 2-3/4 2-23/64 1-49/64 51532 STAINLESS STEELS 12,0 mm 0.4724 M14 X 2 12,0 118,0 71,0 56,0 45,0 64195 CAST IRON 31/64 0.4844 12.30 9/16-12 1/2 4-7/8 3-1/32 2-19/32 1-49/64 51533 HIGH TEMP ALLOYS 12,5 mm 0.4921 M14 X 1,5 14,0 124,0 77,0 60,0 45,0 64196 1/2 0.5000 12.70 1/2 4-7/8 3-1/32 2-19/32 1-49/64 51534 TITANIUM 12,8 mm 0.5039 M14 X 1,25 14,0 124,0 77,0 60,0 45,0 64197 NON-FERROUS 13,0 mm 0.5118 M14 X 1 14,0 124,0 77,0 60,0 45,0 64198 33/64 0.5156 13.10 9/16-18 5/8 4-7/8 3-1/32 2-19/32 1-49/64 51535 HARDENED STEELS 17/32 0.5312 13.49 5/8-11 5/8 4-7/8 3-1/32 2-19/32 1-49/64 51536 13,5 mm 0.5315 14,0 124,0 77,0 60,0 45,0 64199 For patent continued on next page information visitwww.ksptpatents.com 244 DRILLS www.kDyRoIcLeLrSa-sgstool.com