Общий каталог SGS 2021 - страница 240

FRACTIONAL & METRIC Hi-PerCarb® 32° 145° 2 OAL LCF LS LU TOLERANCES (inch) DC DCON ≤.1181 DIAMETER 135 5xD DC = +.00008/+.00047DCON =h6 FRACTIONAL & METRIC SERIES >.1181–.2362 DIAMETER • Double margin design inch & mm EDP NO. DC = +.00016/+.00063 improves accuracy and CUTTING DECIMAL METRIC TAP SIZE SHANK OVERALL FLUTE CLEARED SHANK Ti-NAMITE-Asurface finish along withDIAMETEREQUIV.EQUIV.REFERENCEDIAMETERLENGTHLENGTHLENGTHLENGTH(AlTiN)DCON =h6 increased strength for DC ONLY DCON OAL LCF LU LS >.2362–.3937 DIAMETER aggressive drilling 1/64 0.0156 0.40 1/8 1 1/2 5/32 7/64 1 52300* DC = +.00024/+.00083 • Specialized self- 1/32 0.0312 0.79centering notched point1/8 1 1/2 5/16 7/32 1 52301* DCON = h6 eliminates the need for 3/64 0.0469 1.19 1/16-64 1/8 1 1/2 25/64 19/64 1 52302* >.3937–.7087 DIAMETER spot drilling decreasing 1,25 mm 0.0492thrust and deflection 3,0 38,0 10,0 7,5 25,0 64520* DC = +.00028/+.00098 1,45 mm 0.0571• Engineered edge 3,0 38,0 10,0 7,5 25,0 64521* DCON = h6 protection improves edge #53 0.0595 1.51 1/8 1-1/2 25/64 19/64 1 64522* >.7087–1.1811 DIAMETER strength and reduces 1/16 0.0625 1.59 5/64-60 1/8 2 15/32 23/64 1-1/4 52303*edge fatigue allowing forDC=+.00031/+.00114 increased feed rates 1,6 mm 0.0630 3,0 50,0 12,0 9,0 32,0 64523* DCON = h6 • Recommended for 1,75 mm 0.0689 3,0 50,0 12,0 9,0 32,0 64524* materials ≤ 56 HRc #50 0.0700 1.78(≤ 577 Bhn) 1/8 2 15/32 23/64 1-1/4 64525* TOLERANCES (mm) 5/64 0.0781 1.98 1/8 2 35/64 27/64 1-1/4 52304* ≤3 DIAMETER #47 0.0785 1.99 1/8 2 35/64 27/64 1-1/4 64526* DC = + 0, 0 0 2 /+ 0, 012 2,05 mm 0.0807 3,0 50,0 14,0 11,0 32,0 64527* DCON = h6 #46 0.0810 2.06 1/8 2 35/64 27/64 1-1/4 64528* >3–6 DIAMETER #43 0.0890 2.26 1/8 2 19/32 15/32 1-1/4 64529* DC = +0,004/+0,016 #42 0.0935 2.37 1/8 2 5/8 1/2 1-1/4 64530* DCON = h6 3/32 0.0938 2.38 1/8-32 1/8 2 5/8 1/2 1-1/4 52305  >6–10 DIAMETER #40 0.0980 2.49 1/8 2 43/64 17/32 1-1/4 52306  DC = +0,006/+0,021 2,5 mm 0.0984 3,0 50,0 17,0 13,0 32,0 64531  DCON = h6 #39 0.0995 2.53 1/8 2 43/64 17/32 1-1/4 52307  >10–18 DIAMETER #38 0.1015 2.58 5-40 1/8 2 43/64 17/32 1-1/4 52308  DC = +0,007/+0,025 #37 0.1040 2.64 5-44 1/8 2 45/64 9/16 1-1/4 52309  DCON = h6 #36 0.1065 2.71 6-327/640.10942.781/8 2 45/64 9/16 1-1/4 52310 1/823/419/321-1/452311 >18–30 DIAMETERDC=+0,008/+0,029 #35 0.1100 2.79 1/8 2 3/4 19/32 1-1/4 52312  DCON = h6 #34 0.1110 2.82 1/8 2 3/4 19/32 1-1/4 52313  #33 0.1130 2.87 6-40 1/8 2 3/4 19/32 1-1/4 52314  STEELS 2,9 mm 0.1142 3,0 50,0 19,0 15,0 32,0 64532  #32 0.1160 2.95 1/8 2 3/4 39/64 1-1/4 52315  STAINLESS STEELS 3,0 mm 0.1181 6,0 66,0 28,0 23,0 36,0 64100  CAST IRON #31 0.1200 3.05 1/8 2 3/4 39/64 1-1/4 52316  HIGH TEMP ALLOYS 3,1 mm 0.1220 6,0 66,0 28,0 23,0 36,0 64101  1/8 0.1250 3.18 1/4 3 1 53/64 1-7/16 51580  TITANIUM 3,2 mm 0.1260 M3,5 X 0,35 6,0 66,0 28,0 23,0 36,0 64102  NON-FERROUS #30 0.1285 3.26 1/4 3 1 53/64 1-7/16 51581  3,3 mm 0.1299 M4 X 0,7 6,0 66,0 28,0 23,0 36,0 64103  HARDENED STEELS 3,4 mm 0.1339 8-32,8-36 6,0 66,0 28,0 23,0 36,0 64104  #29 0.1360 3.45 1/4 3 1 53/64 1-7/16 51582  For patent *Single Margin continued on next page information visitwww.ksptpatents.com 240 DRILLS www.kDyRoIcLeLrSa-sgstool.com