Общий каталог SGS 2021 - страница 154

METRIC S-Carb® 38° POS ® 3 LF LU DC DCON 43MBMETRIC SERIES RE APMX DN • Circular land allows mm EDP NO. TOLERANCES (mm) for increased control CUTTING LENGTH OVERALL SHANK REACH NECK POLISHED Ti-NAMITE-B 3 DIAMETER at various speed and DIAMETER OF CUT LENGTH DIAMETER LU DIAMETER FLUTE (TiB2) DC = +0,000/–0,006 feed rates and reduces DC APMX LF DCON DN chatter 3,0 4,5 57,0 6,0 – – • 44916 DCON = h6 • Open fluting for deepslotting and profiling3,06,0 57,0 6,0 10,0 2,74• Polished flutes maximize3,09,057,06,016,02,74RE= +0,0127/–0,0127•44917•44918>3–6 DIAMETER chip evacuation andprovides enhanced finish4,06,0 57,0 6,0 – – • 44919 DC = +0,000/–0,008DCON = h6 • Ball nose design ideal for 4,0 8,0 57,0 6,0 13,0 3,73 • 44920 RE = +0,0127/–0,0127 finishing operations incomplex workpieces• Recommended for4,012,057,0 6,0 21,0 3,73 • 44921 >6–10 DIAMETER5,07,557,06,0––•44922DC= +0,000/–0,009 materials ≤ 150 Bhn 5,0 10,0 63,0 6,0 16,0 4,50 • 44923 DCON = h6 (≤ 7 HRc) 5,0 15,0 63,0 6,0 26,0 4,50 • 44924 RE = +0,0127/–0,0127 6,0 9,0 57,0 6,0 – – • 44925 >10–18 DIAMETER 6,0 12,0 63,0 6,0 19,0 5,49 • 44926 DC = +0,000/–0,011 6,0 18,0 75,0 6,0 31,0 5,49 • 44927 DCON = h6 RE = +0,0127/–0,0127 8,0 12,0 63,0 8,0 – – • 44928 8,0 16,0 75,0 8,0 25,0 7,49 • 44929 >18–25 DIAMETER DC = +0,000/–0,013 8,0 24,0 83,0 8,0 41,0 7,49 • 44930 DCON = h6 10,0 15,0 75,0 10,0 – – • 44931 RE = +0,0127/–0,0127 10,0 20,0 83,0 10,0 31,0 9,50 • 44932 10,0 30,0 100,0 10,0 51,0 9,50 • 44933 NON-FERROUS 12,0 18,0 83,0 12,0 – – • 44934 PLASTICS/COMPOSITES 12,0 24,0 100,0 12,0 37,0 11,48 • 44935 12,0 36,0 130,0 12,0 61,0 11,48 • 44936 16,0 24,0 100,0 16,0 – – • 44937 For patentinformation visit 16,0 32,0 130,0 16,0 49,0 15,49 • 44938 www.ksptpatents.com 16,0 48,0 150,0 16,0 81,0 15,49 • 44939 20,0 30,0 108,0 20,0 – – • 44940 20,0 40,0 130,0 20,0 61,0 19,48 • 44941 20,0 60,0 150,0 20,0 101,0 19,48 • 44942 25,0 37,5 127,0 25,0 – – • 44943 25,0 50,0 152,0 25,0 76,0 24,49 • 44944 25,0 75,0 170,0 25,0 126,0 24,49 • 44945 RE = 1/2 Cutting Diameter (DC) 154 END MILLS wwwE.kNyDoMceILraLS-sgstool.com