Общий каталог SGS 2021 - страница 147

FRACTIONAL S-Carb® 38° POS ® 3 LF LU DC DCON RE APMX DN 43LCBFRACTIONAL SERIES TOLERANCES (inch) inch EDP NO. • Circular land allows 1/4–3/8 DIAMETER CUTTING LENGTH OVERALL SHANK REACH NECK CORNER UNCOATED Ti-NAMITE-B for increased control DC = +0.0000/–0.00035 DIAMETER OF CUT LENGTH DIAMETER LU DIAMETER RADIUSDCAPMXLFDCONDNRE (TiB2) at various speed andfeed rates and reduces DCON = h6RE= +0.0000/–0.00201/2–5/8 DIAMETERDC= +0.0000/–0.000431/43/84 1/4 3/4 .230 .020 33500 33540 chatter1/43/841/41-1/8.230.0203350133541• Symmetrical endgashing for excellent1/43/841/42-1/8.230.0203350233542balance at high speedsand aggressive plunging DCON = h6 5/16 7/16 4 5/16 1-1/8 .292 .020 33503 33543 capability RE = +0.0000/–0.0020 5/16 7/16 4 5/16 2-1/8 .292 .020 33504 33544 • Chip breakers reduce 3/4–1 DIAMETER 3/8 1/2 4 3/8 1-1/8 .355 .020 33507 33547 machine loads up to15% for increased DC = +0.0000/–0.00051 3/8 1/2 4 3/8 2-1/8 .355 .020 33508 33548 roughing feed rate DCON = h6 1/2 5/8 4 1/2 1-3/8 .480 .030 33511 33551 capability RE = +0.0000/–0.0020 • Open fluting for deep1/25/841/22-1/4.480.030–33552slotting and profiling 1/2 5/8 6 1/2 3-3/8 .480 .030 33513 33553 • Necked design with NON-FERROUS 1/2 5/8 6 1/2 4-1/4 .480 .030 33514 33554 blended diametertransitions provide PLASTICS/COMPOSITES 5/8 3/4 4 5/8 1-5/8 .605 .030 33515 33555 clearance to reach 5/8 3/4 6 5/8 2-3/8 .605 .030 33516 33556 • Recommended formaterials ≤ 150 Bhn For patent 5/8 3/4 6 5/8 3-3/8 .605 .030 33517 33557 (≤ 7 HRc) information visitwww.ksptpatents.com 5/8 3/4 6 5/8 4-3/8 .605 .030 33518 33558 3/4 1 4 3/4 2 .730 .030 33519 33559 3/4 1 6 3/4 2-1/2 .730 .030 33520 33560 3/4 1 6 3/4 3-3/8 .730 .030 33521 33561 3/4 1 6 3/4 4-3/8 .730 .030 33522 33562 1 1-1/4 6 1 2-5/8 .980 .030 33523 33563 1 1-1/4 6 1 3-3/8 .980 .030 33524 33564 1 1-1/4 7 1 4-3/8 .980 .030 33525 33565 www.kyocerEaN-DsgMstILoLoSl.com END MILLS 147