Общий каталог SGS 2018 - страница 84

FRACTIONAL Multi-Carb POS 7 9 11 66 TOLERANCES (inch) FRACTIONAL SERIES D1 = +0.0000/–0.0020 D2 = h6 • Heavy core and rigid inch EDP NO. design allow for straight CUTTING LENGTH OVERALL SHANK NO. OF TI-NAMITE-X walls DIAMETER OF CUT LENGTH DIAMETER FLUTES STEELS • High flute count design D1 L2 L1 D2 results in smoother 3/16 5/8 2 3/16 7 36620 STAINLESS STEELS cutting performance 1/4 3/4 2-1/2 1/4 7 36621 CAST IRON and enhanced tool life in precise finishing 3/8 1 3 3/8 7 36622 HIGH TEMP ALLOYS applications 1/2 1-1/4 3 1/2 9 36623 • Recommended for 5/8 1-5/8 3-1/2 5/8 9 36624 TITANIUM materials ≤ 45 HRc (≤ 420 Bhn) 3/4 1-5/8 4 3/4 11 36625 HARDENED STEELS 1 2 6 1 11 36626 Neck Option Available For patent information visit www.ksptpatents.com POS 7 9 11 66CR TOLERANCES (inch) FRACTIONAL SERIES D1 = +0.0000/–0.0020 D2 = h6 • Heavy core and rigid inch EDP NO. R = +0.0000/–0.0020 design allow for straight CUTTING LENGTH OVERALL SHANK CORNER NO. OF TI-NAMITE-X walls DIAMETER OF CUT LENGTH DIAMETER RADIUS FLUTES • High flute count design D1 L2 L1 D2 R STEELS results in smoother 3/16 5/8 2 3/16 .010 7 36627 cutting performance 1/4 3/4 2-1/2 1/4 .015 7 36628 STAINLESS STEELS and enhanced tool life 3/8 1 3 3/8 .015 7 36629 in precise finishing CAST IRON applications 1/2 1-1/4 3 1/2 .030 9 36630 • Enhanced corner 1/2 1-1/4 3 1/2 .090 9 36631 HIGH TEMP ALLOYS geometry with tight 1/2 1-1/4 3 1/2 .120 9 36632 TITANIUM tolerance corner radii 5/8 1-5/8 3-1/2 5/8 .030 9 36633 • Recommended for 5/8 1-5/8 3-1/2 5/8 .090 9 36634 HARDENED STEELS materials ≤ 45 HRc (≤ 420 Bhn) 5/8 1-5/8 3-1/2 5/8 .120 9 36635 3/4 1-5/8 4 3/4 .030 11 36636 For patent 3/4 1-5/8 4 3/4 .090 11 36637 information visit 3/4 1-5/8 4 3/4 .120 11 36638 www.ksptpatents.com 1 2 6 1 .030 11 36639 1 2 6 1 .090 11 36640 1 2 6 1 .120 11 36641 Neck Option Available 84 END MILLS wwwE.kNyDoMceILraLS-sgstool.com