Общий каталог SGS 2018 - страница 44

METRIC Z-Carb-AP Ap Series Diameter (D1) Z1MPCR, Z1MPIC, Ae Ae (mm) Z1MPLC Vc Metric Hardness Ae x D1 Ap x D1 (m/min) 1 3 6 8 10 12 16 20 25 104 RPM 32960 10987 5493 4120 3296 2747 2060 1648 1318 Profile ≤ 0.5 ≤ 1.5 Fz 0.0018 0.0064 0.017 0.030 0.037 0.043 0.051 0.059 0.063 (83-124) STAINLESS STEELS ≤ 275 Bhn Feed (mm/min) 237 281 374 494 488 472 420 389 332 (DIFFICULT) or 304, 304L, 316, 316L ≤ 28 HRc 82 RPM 26174 8725 4362 3272 2617 2181 1636 1309 1047 Slot 1 ≤1 Fz 0.0018 0.0064 0.017 0.030 0.037 0.043 0.051 0.059 0.063 (66-99) Feed (mm/min) 188 223 297 393 387 375 334 309 264 M 94 RPM 30052 10017 5009 3756 3005 2504 1878 1503 1202 Profile ≤ 0.5 ≤ 1.5 Fz 0.0018 0.0064 0.017 0.030 0.037 0.043 0.051 0.059 0.063 STAINLESS STEELS (76-113) (PH) ≤ 325 Bhn Feed (mm/min) 216 256 341 451 445 431 383 355 303 13-8 PH, 15-5 PH, or 17-4 PH, Custom 450 ≤ 35 HRc 76 RPM 24235 8078 4039 3029 2424 2020 1515 1212 969 Slot 1 ≤1 Fz 0.0018 0.0064 0.017 0.030 0.037 0.043 0.051 0.059 0.063 (61-91) Feed (mm/min) 174 207 275 364 359 347 309 286 244 24 RPM 7755 2585 1293 969 776 646 485 388 310 Profile ≤ 0.5 ≤ 1.5 Fz 0.0018 0.0061 0.016 0.027 0.034 0.041 0.048 0.053 0.060 SUPER ALLOYS (20-29) (NICKEL, COBALT, ≤ 300 Bhn Feed (mm/min) 56 63 83 105 105 106 93 82 74 IRON BASE) or Inconel 601, 617, 625, ≤ 32 HRc 20 RPM 6301 2100 1050 788 630 525 394 315 252 Incoloy, Monel 400 Slot 1 ≤1 Fz 0.0018 0.0061 0.016 0.027 0.034 0.041 0.048 0.053 0.060 (16-24) Feed (mm/min) 45 51 67 85 86 86 76 67 60 19 RPM 6010 2003 1002 751 601 501 376 301 240 Profile SUPER ALLOYS ≤ 0.5 ≤ 1.5 Fz 0.0013 0.0043 0.011 0.019 0.024 0.028 0.033 0.037 0.042 (NICKEL, COBALT, (15-23) IRON BASE) ≤ 400 Bhn Feed (mm/min) 31 34 44 57 58 56 50 44 40 Inconel 718, X-750, or Incoloy, Waspaloy, ≤ 43 HRc 15 RPM 4847 1616 808 606 485 404 303 242 194 Hastelloy, Rene Slot 1 ≤1 Fz 0.0013 0.0043 0.011 0.019 0.024 0.028 0.033 0.037 0.042 (12-18) Feed (mm/min) 25 28 36 46 47 45 40 36 33 S 66 RPM 20842 6947 3474 2605 2084 1737 1303 1042 834 Profile ≤ 0.5 ≤ 1.5 Fz 0.0020 0.0071 0.019 0.032 0.040 0.048 0.056 0.064 0.070 TITANIUM ALLOYS (52-79) Pure Titanium, ≤ 350 Bhn Feed (mm/min) 167 197 264 333 333 333 292 267 233 Ti6Al4V, or Ti6Al2Sn4Zr2Mo, ≤ 38 HRc 52 RPM 16480 5493 2747 2060 1648 1373 1030 824 659 Ti4Al4Mo2Sn0.5Si Slot 1 ≤1 Fz 0.0020 0.0071 0.019 0.032 0.040 0.048 0.056 0.064 0.070 (41-62) Feed (mm/min) 132 156 209 264 264 264 231 211 185 23 RPM 7271 2424 1212 909 727 606 454 364 291 TITANIUM ALLOYS Profile (DIFFICULT) ≤ 0.5 ≤ 1.5 Fz 0.0020 0.0071 0.019 0.032 0.040 0.048 0.056 0.064 0.070 Ti10Al2Fe3Al, (18-27) Ti5Al5V5Mo3Cr, ≤ 440 Bhn Feed (mm/min) 58 69 92 116 116 116 102 93 81 Ti7Al4Mo, or Ti3Al8V6Cr4Zr4Mo, ≤ 47 HRc 18 RPM 5816 1939 969 727 582 485 364 291 233 Ti6Al6V6Sn, Ti15V3 Slot Cr3Sn3Al 1 ≤1 Fz 0.0020 0.0071 0.019 0.032 0.040 0.048 0.056 0.064 0.070 (15-22) Feed (mm/min) 47 55 74 93 93 93 81 74 65 Bhn (Brinell)   HRc (Rockwell C) rpm = (Vc x 1000) / (D1 x 3.14) ipm = Fz x 4 x rpm maximum Slotting Ap for Z1PCR <3mm diameter and all Z1MPLC / Z1MPLB is .25 x D1 maximum Profile Ae for Z1PCR <3mm diameter and all Z1MPLC / Z1MPLB is .20 x D1 reduce speed and feed for materials harder than listed reduce feed and Ae when finish milling (.02 x D1 maximum) refer to the KYOCERA SGS Tool Wizard® for complete technical information (www.kyocera-sgstool.com) 44 END MILLS wwwE.kNyDoMceILraLS-sgstool.com