FRACTIONAL M4LB • 5xD 30° POS 15° 4 LF APMX TOLERANCES (inch).010–.120 DIAMETER DCRE DCON M4LB • 5xD FRACTIONAL SERIES DC = +0.000/–0.001 DCON = h6 inch EDP NO. • Four flute design CUTTING SHANK LENGTH OVERALL allows for higher feed DIAMETER DIAMETER OF CUT LENGTH UNCOATED TI-NAMITE-A rates and decreased STEELS DC DCON APMX LF (AlTiN) deflection, improving STAINLESS STEELS 0.010 1/8 0.050 2-1/2 00952 02720 productivity and surfacefinish. 0.015 1/8 0.075 2-1/2 00953 02721 • Proprietary coating CAST IRON 0.020 1/8 0.100 2-1/2 00954 02722 allows for superior chip flow, driving industry HIGH TEMP ALLOYS 0.025 1/8 0.125 2-1/2 00955 02723 leading productivity TITANIUM 0.030 1/8 0.150 2-1/2 00956 02724 and value, even at lowspindle speeds. HARDENED STEELS 0.031 1/8 0.155 2-1/2 00957 02725 • High performance 0.035 1/8 0.175 2-1/2 00958 02726 carbide substrate NON-FERROUS 0.040 1/8 0.200 2-1/2 00959 02727 designed specifically forMicro Tool applications. PLASTICS/COMPOSITES 0.045 1/8 0.225 2-1/2 00960 02728 • Broad portfolio, offering 0.047 1/8 0.235 2-1/2 00961 02729 consistent lengthsof cut, to ensure 0.050 1/8 0.250 2-1/2 00962 02730 application demands 0.055 1/8 0.275 2-1/2 00963 02731 are met. 0.060 1/8 0.300 2-1/2 00964 02732 • Advanced geometriesthat extend tool life, 0.062 1/8 0.310 2-1/2 00965 02733 reduce chatter, cut cycletimes, and improve part 0.065 1/8 0.325 2-1/2 00966 02734 quality. 0.070 1/8 0.350 2-1/2 00967 02735 • All tools in stock to 0.075 1/8 0.375 2-1/2 00968 02736 meet customer orderrequirements. 0.078 1/8 0.390 2-1/2 00969 02737 • All micro tools are 0.080 1/8 0.400 2-1/2 00970 02738 manufactured inaccordance with the 0.085 1/8 0.425 2-1/2 00971 02739 KSPT ISO certified 0.090 1/8 0.450 2-1/2 00972 02740 quality procedures. 0.093 1/8 0.465 2-1/2 00973 02741 0.095 1/8 0.475 2-1/2 00974 02742 0.100 1/8 0.500 2-1/2 00975 02743 0.110 1/8 0.550 2-1/2 00976 02744 0.115 1/8 0.575 2-1/2 00977 02745 0.120 1/8 0.600 2-1/2 00978 02746 RE = 1/2 Cutting Diameter (DC) www.sgsmicErNoDtoMoIlLsL.cSom END MILLS 81