FRACTIONAL M4 • M4CR • 1.5xD 30° POS 15° 4 LF APMX DCON M4 • M4CR TOLERANCES (inch).005–.120 DIAMETER DC RE 1.5xDFRACTIONAL SERIES DC = +0.000/–0.001 DCON = h6 inch EDP NO. • Four flute design RE = +0.0000 / –0.0005 CUTTING SHANK LENGTH OVERALL CORNER allows for higher feed DIAMETER DIAMETER OF CUT LENGTH RADIUS UNCOATED TI-NAMITE-A rates and decreased DC DCON APMX LF RE (AlTiN) deflection, improving STEELS 0.005 1/8 0.008 1-1/2 – 00372 02238 productivity and surfacefinish. STAINLESS STEELS 0.006 1/8 0.009 1-1/2 – 00373 02239 • Enhanced corner 0.007 1/8 0.011 1-1/2 – 00374 02240 geometry with tight CAST IRON tolerance corner radii 0.008 1/8 0.012 1-1/2 – 00375 02241 • Proprietary coating HIGH TEMP ALLOYS 0.009 1/8 0.014 1-1/2 – 00376 02242 allows for superior chip TITANIUM 0.010 1/8 0.015 1-1/2 – 00377 02243 flow, driving industryleading productivity HARDENED STEELS 0.011 1/8 0.017 1-1/2 – 00378 02244 and value, even at low0.0121/80.0181-1/2–0037902245spindle speeds. NON-FERROUS • High performance0.0131/80.0201-1/2–0038002246carbide substrate PLASTICS/COMPOSITES 0.014 1/8 0.021 1-1/2 – 00381 02247 designed specifically forMicro Tool applications. 0.015 1/8 0.023 1-1/2 – 00382 02248 • Broad portfolio, offering 0.015 1/8 0.023 1-1/2 0.003 08986 09126 consistent lengths 0.016 1/8 0.024 1-1/2 – 00383 02249 of cut, to ensureapplication demands 0.017 1/8 0.026 1-1/2 – 00384 02250 are met. 0.018 1/8 0.027 1-1/2 – 00385 02251 • Advanced geometriesthat extend tool life, 0.019 1/8 0.029 1-1/2 – 00386 02252 reduce chatter, cut cycle 0.020 1/8 0.030 1-1/2 – 00387 02253 times, and improve partquality. 0.020 1/8 0.030 1-1/2 0.003 08988 09128 • All tools in stock to 0.020 1/8 0.030 1-1/2 0.005 04024 04025 meet customer orderrequirements. 0.021 1/8 0.032 1-1/2 – 00388 02254 • All micro tools are 0.022 1/8 0.033 1-1/2 – 00389 02255 manufactured in 0.023 1/8 0.035 1-1/2 – 00390 02256 accordance with theKSPT ISO certified 0.024 1/8 0.036 1-1/2 – 00391 02257 quality procedures. 0.025 1/8 0.038 1-1/2 – 00392 02258 0.025 1/8 0.038 1-1/2 0.005 04026 04027 0.025 1/8 0.038 1-1/2 0.010 08990 09130 0.026 1/8 0.039 1-1/2 – 00393 02259 0.027 1/8 0.041 1-1/2 – 00394 02260 0.028 1/8 0.042 1-1/2 – 00395 02261 0.029 1/8 0.044 1-1/2 – 00396 02262 0.030 1/8 0.045 1-1/2 – 00397 02263 0.030 1/8 0.045 1-1/2 0.010 08992 09132 0.031 1/8 0.047 1-1/2 – 00398 02264 0.032 1/8 0.048 1-1/2 – 00399 02265 0.033 1/8 0.050 1-1/2 – 00400 02266 0.034 1/8 0.051 1-1/2 – 00401 02267 continued on next page www.sgsmicErNoDtoMoIlLsL.cSom END MILLS 61