FRACTIONAL M3EB • 8xD 30° POS 15° 3 LF New Expanded Tools APMX DCON TOLERANCES (inch) DC M3EB • 8xD .010–.120 DIAMETER RE FRACTIONAL SERIES DC = +0.000/–0.001 DCON = h6 inch EDP NO. • Three flute design CUTTING SHANK LENGTH OVERALL features improved chip DIAMETER DIAMETER OF CUT LENGTH UNCOATED TI-NAMITE-A space over four flutes STEELS DC DCON APMX LF (AlTiN) and increased strength STAINLESS STEELS 0.010 1/8 0.080 2-1/2 01527 04482 and feed capability overtwo flutes. 0.015 1/8 0.120 2-1/2 01528 04483 • Proprietary coating CAST IRON 0.020 1/8 0.160 2-1/2 01529 04484 allows for superior chip flow, driving industry HIGH TEMP ALLOYS 0.025 1/8 0.200 2-1/2 01530 04485 leading productivity TITANIUM 0.030 1/8 0.240 2-1/2 01531 04486 and value, even at lowspindle speeds. HARDENED STEELS 0.031 1/8 0.248 2-1/2 01532 04487 • High performance 0.035 1/8 0.280 2-1/2 01533 04488 carbide substrate NON-FERROUS 0.040 1/8 0.320 2-1/2 01534 04489 designed specifically forMicro Tool applications. PLASTICS/COMPOSITES 0.045 1/8 0.360 2-1/2 01535 04490 • Broad portfolio, offering 0.047 1/8 0.376 2-1/2 01536 04491 consistent lengthsof cut, to ensure 0.050 1/8 0.400 2-1/2 01537 04492 application demands 0.055 1/8 0.440 2-1/2 01538 04493 are met. 0.060 1/8 0.480 2-1/2 01539 04494 • Advanced geometriesthat extend tool life, 0.062 1/8 0.496 2-1/2 01540 04495 reduce chatter, cut cycletimes, and improve part 0.065 1/8 0.520 2-1/2 01541 04496 quality. 0.070 1/8 0.560 2-1/2 01542 04497 • All tools in stock to 0.075 1/8 0.600 2-1/2 01543 04498 meet customer orderrequirements. 0.078 1/8 0.624 2-1/2 01544 04499 • All micro tools are 0.080 1/8 0.640 2-1/2 01545 04500 manufactured inaccordance with the 0.085 1/8 0.680 2-1/2 01546 04501 KSPT ISO certified 0.090 1/8 0.720 2-1/2 01547 04502 quality procedures. 0.093 1/8 0.744 2-1/2 01548 04503 0.095 1/8 0.760 2-1/2 01549 04504 0.100 1/8 0.800 2-1/2 01550 04505 0.105 1/8 0.840 2-1/2 01551 04506 0.110 1/8 0.880 2-1/2 01552 04507 0.115 1/8 0.920 2-1/2 01553 04508 0.120 1/8 0.960 2-1/2 01554 04509 RE = 1/2 Cutting Diameter (DC) www.sgsmicErNoDtoMoIlLsL.cSom END MILLS 59