Каталог SGS микро инструмент 2021 - страница 45

FRACTIONAL M3B • 1.5xD 30° POS 15° 3 LF APMX    New Expanded Tools DCON TOLERANCES (inch) DC.010–.120 DIAMETERRE M3B • 1.5xD FRACTIONAL SERIES DC = +0.000/–0.001 DCON = h6 inch EDP NO. • Three flute design CUTTING SHANK LENGTH OVERALL features improved chip DIAMETER DIAMETER OF CUT LENGTH UNCOATED TI-NAMITE-A space over four flutes STEELS DC DCON APMX LF (AlTiN) and increased strength STAINLESS STEELS 0.010 1/8 0.015 1-1/2 01367 04322 and feed capability overtwo flutes. 0.011 1/8 0.017 1-1/2 01368 04323 • Proprietary coating CAST IRON 0.012 1/8 0.018 1-1/2 01369 04324 allows for superior chipflow, driving industry HIGH TEMP ALLOYS 0.013 1/8 0.020 1-1/2 01370 04325 leading productivity TITANIUM 0.014 1/8 0.021 1-1/2 01371 04326 and value, even at lowspindle speeds. HARDENED STEELS 0.015 1/8 0.023 1-1/2 01372 04327 • High performance 0.016 1/8 0.024 1-1/2 01373 04328 carbide substrate NON-FERROUS designed specifically for0.0171/80.0261-1/20137404329Micro Tool applications. PLASTICS/COMPOSITES 0.018 1/8 0.027 1-1/2 01375 04330 • Broad portfolio, offering 0.019 1/8 0.029 1-1/2 01376 04331 consistent lengthsof cut, to ensure 0.020 1/8 0.030 1-1/2 01377 04332 application demands 0.021 1/8 0.032 1-1/2 01378 04333 are met. • Advanced geometries 0.022 1/8 0.033 1-1/2 01379 04334 that extend tool life, 0.023 1/8 0.035 1-1/2 01380 04335 reduce chatter, cut cycletimes, and improve part 0.024 1/8 0.036 1-1/2 01381 04336 quality. 0.025 1/8 0.038 1-1/2 01382 04337 • All tools in stock to 0.026 1/8 0.039 1-1/2 01383 04338 meet customer orderrequirements. 0.027 1/8 0.041 1-1/2 01384 04339 • All micro tools are 0.028 1/8 0.042 1-1/2 01385 04340 manufactured inaccordance with the 0.029 1/8 0.044 1-1/2 01386 04341 KSPT ISO certified 0.030 1/8 0.045 1-1/2 01387 04342 quality procedures. 0.031 1/8 0.047 1-1/2 01388 04343 0.032 1/8 0.048 1-1/2 01389 04344 0.033 1/8 0.050 1-1/2 01390 04345 0.034 1/8 0.051 1-1/2 01391 04346 0.035 1/8 0.053 1-1/2 01392 04347 0.036 1/8 0.054 1-1/2 01393 04348 0.037 1/8 0.056 1-1/2 01394 04349 0.038 1/8 0.057 1-1/2 01395 04350 0.039 1/8 0.059 1-1/2 01396 04351 0.040 1/8 0.060 1-1/2 01397 04352 0.041 1/8 0.062 1-1/2 01398 04353 0.042 1/8 0.063 1-1/2 01399 04354 0.043 1/8 0.065 1-1/2 01400 04355 RE = 1/2 Cutting Diameter (DC) continued on next page www.sgsmicErNoDtoMoIlLsL.cSom END MILLS 45