FRACTIONAL M3 • 1.5xD • 15xD Overall Reach 30° POS 15° 3 LF APMX LU M3 • 1.5xD TOLERANCES (inch) DCON 15xD .010–.120 DIAMETER DC DN FRACTIONAL SERIES DC = +0.000/–0.001 DCON = h6 inch EDP NO. • Three flute design CUTTING SHANK LENGTH NECK OVERALL features improved chip DIAMETER DIAMETER OF CUT REACH DIAMETER LENGTH UNCOATED TI-NAMITE-A space over four flutes STEELS DC DCON APMX LU DN LF (AlTiN) and increased strength STAINLESS STEELS 0.010 1/8 0.015 0.150 0.009 2-1/2 09596 03616 and feed capability overtwo flutes. 0.015 1/8 0.023 0.225 0.014 2-1/2 09603 03617 • Proprietary coating CAST IRON 0.020 1/8 0.030 0.300 0.018 2-1/2 09610 03618 allows for superior chip flow, driving industry HIGH TEMP ALLOYS 0.025 1/8 0.038 0.375 0.023 2-1/2 09617 03619 leading productivity TITANIUM 0.030 1/8 0.045 0.450 0.028 2-1/2 09624 03620 and value, even at lowspindle speeds. HARDENED STEELS 0.031 1/8 0.047 0.465 0.029 2-1/2 09631 03621 • High performance 0.035 1/8 0.053 0.525 0.032 2-1/2 09638 03622 carbide substrate NON-FERROUS 0.040 1/8 0.060 0.600 0.037 2-1/2 09645 03623 designed specifically forMicro Tool applications. PLASTICS/COMPOSITES 0.045 1/8 0.068 0.675 0.042 2-1/2 09652 03624 • Broad portfolio, offering 0.047 1/8 0.071 0.705 0.044 2-1/2 09659 03625 consistent lengthsof cut, to ensure 0.050 1/8 0.075 0.750 0.047 2-1/2 09666 03626 application demands 0.055 1/8 0.083 0.825 0.051 2-1/2 09673 03627 are met. 0.060 1/8 0.090 0.900 0.056 2-1/2 09680 03628 • Advanced geometriesthat extend tool life, 0.062 1/8 0.093 0.930 0.058 2-1/2 09687 03629 reduce chatter, cut cycletimes, and improve part 0.065 1/8 0.098 0.975 0.061 2-1/2 09694 03630 quality. 0.070 1/8 0.105 1.050 0.065 2-1/2 09701 03631 • All tools in stock to 0.075 1/8 0.113 1.125 0.070 2-1/2 09708 03632 meet customer orderrequirements. 0.078 1/8 0.117 1.170 0.073 2-1/2 09715 03633 • All micro tools are 0.080 1/8 0.120 1.200 0.075 2-1/2 09722 03634 manufactured inaccordance with the 0.085 1/8 0.128 1.275 0.079 2-1/2 09729 03635 KSPT ISO certified 0.090 1/8 0.135 1.350 0.084 2-1/2 09736 03636 quality procedures. 0.093 1/8 0.140 1.395 0.087 3 09743 03637 0.095 1/8 0.143 1.425 0.089 3 09750 03638 0.100 1/8 0.150 1.500 0.094 3 09757 03639 0.110 1/8 0.165 1.650 0.103 3 09764 03640 0.115 1/8 0.173 1.725 0.108 3 09771 03641 0.120 1/8 0.180 1.800 0.112 3 09778 03642 www.sgsmicErNoDtoMoIlLsL.cSom END MILLS 35