Каталог SGS микро инструмент 2021 - страница 31

FRACTIONAL M3 • M3CR • 1.5xD • 8xD Overall Reach 30° POS 15° 3 LF APMX LU DCON M3 • M3CR • 1.5xD TOLERANCES (inch).010–.120 DIAMETER DC DNRE 8xDFRACTIONAL SERIES DC = +0.000/–0.001 DCON = h6 inch EDP NO. • Three flute design RE = +0.0000 / –0.0005 CUTTING SHANK LENGTH NECK OVERALL CORNER features improved chip DIAMETER DIAMETER OF CUT REACH DIAMETER LENGTH RADIUS UNCOATED TI-NAMITE-A space over four flutes DC DCON APMX LU DN LF RE (AlTiN) and increased strength STEELS 0.010 1/8 0.015 0.080 0.009 2-1/2 – 09601 03562 and feed capability overtwo flutes. STAINLESS STEELS 0.015 1/8 0.023 0.120 0.014 2-1/2 – 09608 03563 • Proprietary coating 0.015 1/8 0.023 0.120 0.014 2-1/2 0.003 08783 08885 allows for superior chip CAST IRON flow, driving industry 0.020 1/8 0.030 0.160 0.018 2-1/2 – 09615 03564 leading productivity HIGH TEMP ALLOYS 0.020 1/8 0.030 0.160 0.018 2-1/2 0.005 08786 08888 and value, even at lowspindle speeds. TITANIUM 0.025 1/8 0.038 0.200 0.023 2-1/2 – 09622 03565 • High performance HARDENED STEELS 0.025 1/8 0.038 0.200 0.023 2-1/2 0.005 08789 08891 carbide substrate0.0301/80.0450.2400.0282-1/2–0962903566designed specifically forMicro Tool applications. NON-FERROUS 0.030 1/8 0.045 0.240 0.028 2-1/2 0.005 08792 08894 • Broad portfolio, offering PLASTICS/COMPOSITES 0.031 1/8 0.047 0.248 0.029 2-1/2 – 09636 03567 consistent lengthsof cut, to ensure 0.035 1/8 0.053 0.280 0.032 2-1/2 – 09643 03568 application demands 0.035 1/8 0.053 0.280 0.032 2-1/2 0.005 08795 08897 are met. 0.035 1/8 0.053 0.280 0.032 2-1/2 0.010 08798 08900 • Advanced geometriesthat extend tool life, 0.040 1/8 0.060 0.320 0.037 2-1/2 – 09650 03569 reduce chatter, cut cycletimes, and improve part 0.040 1/8 0.060 0.320 0.037 2-1/2 0.005 08801 08903 quality. 0.040 1/8 0.060 0.320 0.037 2-1/2 0.010 08804 08906 • All tools in stock to 0.045 1/8 0.068 0.360 0.042 2-1/2 – 09657 03570 meet customer orderrequirements. 0.045 1/8 0.068 0.360 0.042 2-1/2 0.005 08807 08909 • All micro tools are 0.045 1/8 0.068 0.360 0.042 2-1/2 0.010 08810 08912 manufactured inaccordance with the 0.047 1/8 0.071 0.376 0.044 2-1/2 – 09664 03571 KSPT ISO certified 0.050 1/8 0.075 0.400 0.047 2-1/2 – 09671 03572 quality procedures. 0.050 1/8 0.075 0.400 0.047 2-1/2 0.005 08813 08915 0.050 1/8 0.075 0.400 0.047 2-1/2 0.010 08816 08918 0.050 1/8 0.075 0.400 0.047 2-1/2 0.015 08819 08921 0.055 1/8 0.083 0.440 0.051 2-1/2 – 09678 03573 0.060 1/8 0.090 0.480 0.056 2-1/2 – 09685 03574 0.060 1/8 0.090 0.480 0.056 2-1/2 0.005 08822 08924 0.060 1/8 0.090 0.480 0.056 2-1/2 0.010 08825 08927 0.060 1/8 0.090 0.480 0.056 2-1/2 0.015 08828 08930 0.062 1/8 0.093 0.496 0.058 2-1/2 – 09692 03575 0.065 1/8 0.098 0.520 0.061 2-1/2 – 09699 03576 0.070 1/8 0.105 0.560 0.065 2-1/2 – 09706 03577 0.070 1/8 0.105 0.560 0.065 2-1/2 0.005 08831 08933 0.070 1/8 0.105 0.560 0.065 2-1/2 0.010 08834 08936 0.070 1/8 0.105 0.560 0.065 2-1/2 0.015 08837 08939 0.075 1/8 0.113 0.600 0.070 2-1/2 – 09713 03578 continued on next page www.sgsmicErNoDtoMoIlLsL.cSom END MILLS 31