Каталог SGS микро инструмент 2021 - страница 10

FRACTIONAL M2 • M2CR • 1.5xD 30° POS 15° 2 LF APMX M2 • M2CR DCON 1.5xD DC TOLERANCES (inch) FRACTIONAL SERIES RE .004–.120 DIAMETER DC = +0.000/–0.001 • Two flute design is inch EDP NO. DCON = h6 ideal for softer alloyed, CUTTING SHANK LENGTH OVERALL CORNER RE = +0.0000/–0.0005 non-ferrous material DIAMETER DIAMETER OF CUT LENGTH RADIUS UNCOATED TI-NAMITE-A applications that require DC DCON APMX LF RE (AlTiN) slotting or involve heavychip loads.0.004 1/8 0.006 1-1/2 – 04004 04000 STEELS • Enhanced corner 0.005 1/8 0.008 1-1/2 – 00301 02201 STAINLESS STEELS geometry with tight 0.006 1/8 0.009 1-1/2 – 00302 02202 tolerance corner radii CAST IRON • Proprietary coating 0.007 1/8 0.011 1-1/2 – 00303 02203 allows for superior chip 0.008 1/8 0.012 1-1/2 – 00304 02204 HIGH TEMP ALLOYS flow, driving industryleading productivity0.009 1/8 0.014 1-1/2 – 00305 02205 TITANIUM and value, even at low 0.010 1/8 0.015 1-1/2 – 00306 02206spindle speeds. HARDENED STEELS • High performance 0.011 1/8 0.017 1-1/2 – 00307 02207 NON-FERROUS carbide substrate 0.012 1/8 0.018 1-1/2 – 00308 02208 designed specifically forMicro Tool applications.0.0131/8 0.020 1-1/2 – 00309 02209 PLASTICS/COMPOSITES • Broad portfolio, offering 0.014 1/8 0.021 1-1/2 – 00310 02210 consistent lengths of cut,to ensure application0.0151/8 0.023 1-1/2 – 00311 02211 demands are met. 0.015 1/8 0.023 1-1/2 0.003 08500 08641 • Advanced geometries 0.016 1/8 0.024 1-1/2 – 00312 02212 that extend tool life,reduce chatter, cut cycle0.0171/8 0.026 1-1/2 – 00313 02213 times, and improve part 0.018 1/8 0.027 1-1/2 – 00314 02214 quality. • All tools in stock to 0.019 1/8 0.029 1-1/2 – 00315 02215 meet customer order 0.020 1/8 0.030 1-1/2 – 00316 02216 requirements.• All micro tools are0.020 1/8 0.030 1-1/2 0.003 08502 08643 manufactured in 0.020 1/8 0.030 1-1/2 0.005 08504 08645 accordance with theKSPT ISO certified0.021 1/8 0.032 1-1/2 – 00317 02217 quality procedures. 0.022 1/8 0.033 1-1/2 – 00318 02218 0.023 1/8 0.035 1-1/2 – 00319 02219 0.024 1/8 0.036 1-1/2 – 00320 02220 0.025 1/8 0.038 1-1/2 – 00321 02221 0.025 1/8 0.038 1-1/2 0.010 08505 08646 0.026 1/8 0.039 1-1/2 – 00322 02222 0.027 1/8 0.041 1-1/2 – 00323 02223 0.028 1/8 0.042 1-1/2 – 00324 02224 0.029 1/8 0.044 1-1/2 – 00325 02225 0.030 1/8 0.045 1-1/2 – 00326 02226 0.030 1/8 0.045 1-1/2 0.010 08507 08648 0.031 1/8 0.047 1-1/2 – 00327 02227 0.032 1/8 0.048 1-1/2 – 00328 02228 0.033 1/8 0.050 1-1/2 – 00329 02229 0.034 1/8 0.051 1-1/2 – 00330 02230 continued on next page 10 END MILLS wwEwN.DsgMsImLLicSrotools.com