Каталог SGS инструмент для сверления - страница 57

PERFORMANCE. • Double margin construction design stabilized the drill for greater hole accuracy and improved surface finish in final hole. • Minimized delamination at hole entry/exit. • Manufactured exclusively with Di-NAMITE coating for even wear, extended tool life and improved finishes. PRECISION. A test was conducted of our CFRP drill to determine the necessity of coating when drilling Carbon Fiber material. Fifty holes were drilled using a special size .190” CFRP drill. The tool’s design produces acceptable quality holes; but as shown in the photos, early edge wear on the uncoated drill resulted in holes with frayed edges. The diamond coated drill produced all 50 holes with little to no fraying and edge wear was 38% less than the uncoated drills. The geometry of the 8 Facet drill with the Di-NAMITE coating is a necessity for additional tool life and productivity when manufacturing Carbon Fiber material. SPEED FEED DIAMETER HOLE DEPTH WORKPIECE MACHINE TYPE COOLANT 5,000 rpm 5.0 ipm .190” .240” CFRP Vertical Machining none Center TOOL NO. TYPE TIR IN USAGE TOOL NO. TYPE TIR IN USAGE MACHINE MACHINE DESCRIPTION DESCRIPTION 1 .190” CFRP drill .0001” 50 holes 2 .190” CFRP drill .0002” 50 holes uncoated diamond INSPECTION Good hole quality for 1st 3 holes. INSPECTION Good hole quality all 50 holes NOTES fraying starting by 3rd hole, .0021” wear NOTES slight fraying, .0013” wear 1ST HOLE 3RD HOLE 50TH HOLE AFTER 50 HOLES 1ST HOLE 25TH HOLE 50TH HOLE AFTER 50 HOLES ® C R Y S TA L L I N E DIAMOND C O AT I N G PASSION. • The compound angle creates 4 cutting edges along the drill point. • Distinct double angle prevents abrasiveness of the Composite from localizing along the point and diminishing tool life. www.kyocera-sgstool.com www.kyocera-sgstool.com 57