Каталог SGS инструмент для сверления - страница 51

Series Diameter (D1) 140M 5D Vc (mm) Metric Hardness (m/min) 3 6 8 10 12 14 16 ≤ 300 Bhn 29 RPM 3070 1535 1151 921 767 658 576 SUPER ALLOYS or (23-35) Fr 0.020 0.039 0.052 0.065 0.078 0.091 0.104 (NICKEL , COBALT, ≤ 32 HRc Feed (mm/min) 60 60 60 60 60 60 60 IRON BASE) 15 RPM 1616 808 606 485 404 346 303 Inconel 601, 617, 625, Incoloy, ≤ 400 Bhn Monel 400, Rene, Waspaloy or Fr 0.015 0.031 0.041 0.052 0.062 0.072 0.083 ≤ 43 HRc (12-18) Feed (mm/min) 25 25 25 25 25 25 25 Series 140 5xD  ≤ 275 Bhn 66 RPM 6947 3474 2605 2084 1737 1489 1303 S or (52-79) Fr 0.040 0.079 0.106 0.132 0.158 0.185 0.211 ≤ 28 HRc Feed (mm/min) 275 275 275 275 275 275 275 TITANIUM ALLOYS 49 RPM 5170 2585 1939 1551 1293 1108 969 Pure Titanium, Ti6Al4V, ≤ 350 Bhn Ti6Al2Sn4Zr2Mo, or (39-59) Fr 0.039 0.077 0.103 0.129 0.155 0.181 0.206 Ti4Al4Mo2Sn0.5Si, ≤ 38 HRc Feed (mm/min) 200 200 200 200 200 200 200 Ti-6Al4V |  ≤ 440 Bhn 26 RPM 2747 1373 1030 824 687 589 515 Speed & Feed Recommendations or (21-31) Fr 0.029 0.058 0.078 0.097 0.117 0.136 0.155 ≤ 47 HRc Feed (mm/min) 80 80 80 80 80 80 80 ≤ 80 Bhn 235 RPM 24882 12441 9331 7465 6220 5332 4665 or (188-282) Fr 0.118 0.237 0.316 0.395 0.473 0.552 0.631 ALUMINUM ALLOYS ≤ 47 HRb Feed (mm/min) 2945 2945 2945 2945 2945 2945 2945 2017, 2024, 356, 201 RPM 21327 10664 7998 6398 5332 4570 3999 6061, 7075 ≤ 150 Bhn or (161-241) Fr 0.119 0.238 0.318 0.397 0.476 0.556 0.635 ≤ 7 HRc Feed (mm/min) 2540 2540 2540 2540 2540 2540 2540 N 168 RPM 17773 8886 6665 5332 4443 3808 3332 ≤ 140 Bhn or (134-201) Fr 0.048 0.096 0.128 0.159 0.191 0.223 0.255 COPPER ALLOYS ≤ 3 HRc Feed (mm/min) 850 850 850 850 850 850 850 Alum Bronze, C110, 134 RPM 14218 7109 5332 4265 3555 3047 2666 Muntz Brass ≤ 200 Bhn or (107-161) Fr 0.048 0.096 0.128 0.161 0.193 0.225 0.257 ≤ 23 HRc Feed (mm/min) 685 685 685 685 685 685 685 Note: •  Bhn (Brinell)   HRc (Rockwell C)   HRb (Rockwell B) •  rpm = (1000 x m / min) / (3.14 x D1) www.sgstoolwizard.com •  mm / min = (mm / revolution) x rpm •  reduce speed and feed for materials harder than listed •  refer to the KYOCERA SGS Tool Wizard for complete technical information (www.kyocera-sgstool.com) www.kyocera-sgstool.com 51