Каталог Iscar вращающийся инструмент 2017 - страница 47

l Ts L1 a° 120º D D2 120° MM ECS Interchangeable Solid Carbide L1 Centering Drills (DIN 332) a° L3 Fig. 1 Type A Fig. 2 Type B Dimensions Designation D D 2 l L 1 L 3 Ts a° Fig. IC908 MM ECS-A1.00X06-2T04 1.07 6.00 10.00 1.6 - T04 60 1 • MM ECS-A1.60X06-2T04 1.65 6.00 10.00 2.4 - T04 60 1 • MM ECS-A2.00X06-2T04 2.07 6.00 10.00 2.9 - T04 60 1 • MM ECS-A3.15X08-2T05 3.28 8.00 15.00 4.6 - T05 60 1 • MM ECS-A4.00X10-2T06 4.12 10.00 19.00 5.9 - T06 60 1 • MM ECS-A5.00X12-2T08 5.13 12.00 23.00 7.2 - T08 60 1 • MM ECS-A6.30X16-2T10 6.46 16.00 28.00 8.9 - T10 60 1 • MM ECS-B3.15X12-2T08 3.24 12.00 23.00 4.4 7.40 T08 60 2 • MM ECS-B4.00X127-2T08 4.09 12.70 23.00 5.6 9.50 T08 60 2 • MM ECS-B5.00X19-2T12 5.09 18.45 25.50 6.9 11.70 T12 60 2 • MM ECS-B6.30X20-2T12 6.41 18.45 25.50 8.6 14.50 T12 60 2 • • For shanks, see pages 63-69 • For clamping keys (should be ordered separately), tightening torques and clamping instructions, see pages 34-35 • Do not apply lubricant to the threaded connection. • For user guide, see pages 38,147-151 l Ts D 90° MM ECD NC Spotting Drills for Accurately Locating a Hole without Using a Guide Bushing Dimensions ENDMILLS • SOLID CARBIDE • MULTI-MASTER Designation D l Ts IC908 MM ECD-06X90-2T04 6.00 11.00 T04 • MM ECD-08X90-2T05 8.00 15.00 T05 • MM ECD-10X90-2T06 10.00 19.00 T06 • MM ECD-12X90-2T08 12.00 23.00 T08 • MM ECD-16X90-2T10 16.00 28.00 T10 • • For shanks, see pages 63-69 • For clamping keys (should be ordered separately), tightening torques and clamping instructions, see pages 34-35 • Do not apply lubricant to the threaded connection l 0.25x45° Ts MM EFCB Interchangeable 4 Flute 30° Helix Solid D D2 Carbide Heads for Flat Counter Boring ap Ha° Recommended Dimensions Machining Data f z Designation D a p l D 2 Ts Flute IC908 (mm/t) MM EFCB110A08-4T06 11.00 8.40 16.50 10.00 T06 4 • 0.03-0.04 MM EFCB140A11-4T08 14.00 11.50 28.00 12.00 T08 4 • 0.04-0.05 • 0.06 mm maximum concavity on the tool's bottom • For shanks, see pages 63-69 • For clamping keys (should be ordered separately), tightening torques and clamping instructions, see pages 34-35 • Do not apply lubricant to the threaded connection. • For user guide, see pages 38,147-151 43