Каталог Iscar токарный инструмент 2017 - страница 14

l1 l2 PLBOR/L 75° h h Lever Lock Tools Carrying LOMX Tangentially Clamped Super Heavy Turning Inserts f b 75˚ Right-hand shown Designation h b l 1 l 2 f G a ° G r ° Insert PLBOR/L 5050T-40 50.0 50.0 300.00 60.0 50.0 -6 -6 LOMX 4022 PLBOR/L 6060V-40 60.0 60.0 400.00 60.0 60.0 -6 -6 LOMX 4022 For inserts, see pages: LOMX-H6P (151) ISCAR’s tangential LOMX 402224-H6P insert for very heavy turning applications. This tangentially clamped insert with 4 cutting edges is made from the tough grade IC8250. It can machine at up to 35 mm depth of cut and up to 2 mm/rev feed. The insert is clamped on a very rigid lever lock pocket equipped with a protective seat. ISOTURN TOOLS ap Application Range H6P Chipformer mm 45 1 2 40 35 30 25 Double-sided 20 with 4 cutting edges 15 10 3 4 1 2 F (mm/rev) Lever Lock Accessible from Tangentially Clamped Insert Clamping Surfaces Protective Seat Both Tool Sides Spare Parts Designation PLBOR/L TLN 40 SR 10402265 LR 8 SR 10643960 SP D7.5XL23 T-20/5 HW 6.0 6° PRWR/L h1 h Toolholders with Cartridges for Under Floor Railroad Wheel Re-turning Lathes 87° f b (Model 106 Thread Profile Machine) 84° l1 Right-hand shown Designation h h 1 b l 1 f PRWR/L 50-55 50.0 44.0 55.0 210.00 55.0 SR M6X1X16 HW 3.0 • Cartridges should be ordered separately For tools, see pages: PRWR/L 175-CA (10) • PRWR/L 177-CA (11) l2 PRWR/L 175-CA Cartridges for PRWR/L 50-55 b Railroad Wheel Re-Turning Tools h1 f l l1 Right-hand shown Designation h 1 b l 1 l 2 f Insert PRWR/L 175-CA-19 32.0 22.6 43.00 35.0 23.0 LNMX 191940 SR LCS 5 LR 5 HW 3.0 PRWR/L 175-CA-30 32.0 22.6 43.00 35.0 23.0 LNMX 301940 SR LCS 5 LR 5 HW 3.0 For inserts, see pages: LNMX 19/30 (153) For holders, see pages: PRWR/L (10) 10 ISCAR