Каталог Iscar токарный инструмент 2017 - страница 11

SLANR/L-TANG h h h 16 mm Shank Configuration 93° Screw-Lock Tools Carrying LNMX.. Tangentially Clamped Inserts 4 Ref. 3.7° f b f SLANR/L 1616M-11S l 2 l 1 l2 Right-hand shown Designation h b l 1 l 2 f G a ° G r ° Insert SLANR/L 1616H-11 TANG 16.0 16.0 100.00 20.0 20.0 -6 -6 LNMX 1104.. SLANR/L 1616M-11S TANG 16.0 16.0 150.00 20.0 16.2 -6 -6 LNMX 1104.. SLANR/L 2020K-11 TANG 20.0 20.0 125.00 20.0 25.0 -6 -6 LNMX 1104.. SLANR/L 2525M-11 TANG 25.0 25.0 150.00 25.0 30.0 -6 -6 LNMX 1104.. SLANR/L 2020K-15 TANG 20.0 20.0 100.00 25.0 25.0 -6 -6 LNMX 1506.. SLANR/L 2525M-15 TANG 25.0 25.0 150.00 25.0 30.0 -6 -6 LNMX 1506.. SLANR/L 3232P-15 TANG 32.0 32.0 170.00 35.0 37.0 -6 -6 LNMX 1506.. SLANR/L 4040R-15 TANG 40.0 40.0 200.00 35.0 45.0 -6 -6 LNMX 1506.. ISOTURN TOOLS SLANR/L 3232P-22 TANG 32.0 32.0 170.00 35.0 38.0 -6 -6 LNMX 2210.. SLANR/L 4040R-22 TANG 40.0 40.0 200.00 40.0 47.0 -6 -6 LNMX 2210.. SLANR/L 5050S-22 TANG 50.0 50.0 250.00 35.0 57.0 -6 -6 LNMX 2210.. • ap max for facing: LNMX 11-2.8 mm, LNMX 15-3.8 mm, LNMX 22-5.8 mm For inserts, see pages: LNMX-HM (152) • LNMX-HT (152) • LNMX-WG (152) The HELITURN system features a unique, double-sided insert The lower forces and smaller loads ensure better with 4 cutting edges for Fast Metal Removal (FMR) turning. tool life, higher stability and the ability to use very HELITURN is a tangentially clamped insert with a large depths of cut and higher feeds. unique helical shaped cutting edge, useful for large The chipformer (with small bumps), deforms and depths of cut and higher than normal feed rates. breaks the chip into rib type curved segments which The LNMX...-HT HELITURN insert is a screw clamped into can easily be removed from the cutting area. the SLANR toolholder and supported by the TLN ..-HT carbide The insert has a frontal clearance angle of 3.7° with a 6° side seat. This seat has ground surfaces on the top and bottom clearance angle to enable machining at a 90° shoulder. to ensure perfect contact of the insert with the toolholder. Depths of cut up to 8 mm and facing depths up to 3.2 mm The upper rake face of this insert is mounted level with the and up to 1.2 mm/rev are achievable with HELITURN. top of the toolholder to enable chips to flow across the insert The high positive rake angle of these tools allows 10-15% less without being disturbed by clamps or the toolholder body. power usage than conventional tools with the same parameters. The 4 curved helical cutting edges ensure positive radial rake By using HELITURN tools, huge cost savings and angles and soft penetration into the material being cut. profitability in lathe operations are guaranteed. Spare Parts Designation SLANL 1616H-11 TANG TLN 11L-HT SR RS4 T-6/5 SR 34-550-C BLD T10/S7 SW6-SD SLANL 1616M-11S TANG TLN 11L-HT SR RS4 T-6/5 SR 34-550-C BLD T10/S7 SW6-SD SLANR 1616H-11 TANG TLN 11R-HT SR RS4 T-6/5 SR 34-550-C BLD T10/S7 SW6-SD SLANR 1616M-11S TANG TLN 11R-HT SR RS4 T-6/5 SR 34-550-C BLD T10/S7 SW6-SD SLANL 2020K-11 TANG TLN 11L-HT SR RS4 T-6/5 SR 34-550-C BLD T10/S7 SW6-SD SLANR 2020K-11 TANG TLN 11R-HT SR RS4 T-6/5 SR 34-550-C BLD T10/S7 SW6-SD SLANL 2525M-11 TANG TLN 11L-HT SR RS4 T-6/5 SR 34-550-C BLD T10/S7 SW6-SD SLANR 2525M-11 TANG TLN 11R-HT SR RS4 T-6/5 SR 34-550-C BLD T10/S7 SW6-SD SLANL 2020K-15 TANG TLN 15L-HT SR RS4 T-6/5 SR 34-535-SN BLD T15/S7 SW6-T-SH SLANR 2020K-15 TANG TLN 15R-HT SR RS4 T-6/5 SR 34-535-SN BLD T15/S7 SW6-T-SH SLANL 2525M-15 TANG TLN 15L-HT SR RS4 T-6/5 SR 34-535-SN BLD T15/S7 SW6-T-SH SLANR 2525M-15 TANG TLN 15R-HT SR RS4 T-6/5 SR 34-535-SN BLD T15/S7 SW6-T-SH SLANL 3232P-15 TANG TLN 15L-HT SR RS4 T-6/5 SR 34-535-SN BLD T15/S7 SW6-T-SH SLANR 3232P-15 TANG TLN 15R-HT SR RS4 T-6/5 SR 34-535-SN BLD T15/S7 SW6-T-SH SLANL 4040R-15 TANG TLN 15L-HT SR RS4 T-6/5 SR 34-535-SN BLD T15/S7 SW6-T-SH SLANR 4040R-15 TANG TLN 15R-HT SR RS4 T-6/5 SR 34-535-SN BLD T15/S7 SW6-T-SH SLANL 3232P-22 TANG TLN 22L-HT SR 10500401 T-7/5 SR 14-591/L-SN BLD T20/S7 SW6-T-SH SLANR 3232P-22 TANG TLN 22R-HT SR 10500401 T-7/5 SR 14-591/L-SN BLD T20/S7 SW6-T-SH SLANL 4040R-22 TANG TLN 22L-HT SR 10500401 T-7/5 SR 14-591/L-SN BLD T20/S7 SW6-T-SH SLANR 4040R-22 TANG TLN 22R-HT SR 10500401 T-7/5 SR 14-591/L-SN BLD T20/S7 SW6-T-SH SLANL 5050S-22 TANG TLN 22L-HT SR 10500401 T-7/5 SR 14-591/L-SN BLD T20/S7 SW6-T-SH SLANR 5050S-22 TANG TLN 22R-HT SR 10500401 T-7/5 SR 14-591/L-SN BLD T20/S7 SW6-T-SH 7