Каталог Iscar высокоточные развертки и метчики 2022 - страница 23

REAMERS USER GUIDE High Speed Reaming System Important with Internal Coolant Holes Lead type of the tool (pads) should be compatible The INDEXH-REAM standard line covers reaming with the lead type of the insert. Using an improper applications of 8-32 mm hole diameters. The indexable insert will damage the tool and the reamed part. cutting insert has two cutting corners with 4 lead angle options and 3 rake angle variations, covering most workpiece material types. The INDEXH-REAM single indexable insert with carbide pads provides a combination of economical and high precision results on a very wide range of materials. Guiding Pad Line The guiding pads are precisely ground for a specific diameter, and therefore, can only be used for reaming on appropriate hole sizes. The adjustment mechanism is designed for a specific diameter setting and for wear compensation (a few microns only). The same tool can not be used for reaming different diameters. Guiding Pad Line ≤20µm (≤0.75µin) Tool Designation Code Key RM SET 12.000(1) H6 T B C16 s Reamer Single-Edged Tool Hole Diameter Hole Tolerance Hole Type B Blind T Through Lead Type(2) A, B, C, D (see page 338) Note: A, C, D - optional Shank Type C Cylindrical W Weldon F Flat (1) To be ordered for each specific diameter and tolerance Reamer Length S-Short (2) Tool lead type - according to insert’s lead type 333