Каталог Iscar торцевые фрезы 2022 - страница 32

FACE MILLS DHUB DCONMS HP F90AT-22 90° Face Mills Carrying HP AD.. Rd° 2207... Long Edged Inserts OAL APMX DC Designation DC CICT(1) APMX OAL DHUB DCONMS RMPX°(2) Arbor(3) CSP(4) kg HP F90AT D50-3-22-22 50.00 3 21.00 50.00 48.00 22.00 5.0 A 1 0.36 HP F90AT D50-4-22-22 50.00 4 21.00 50.00 48.00 22.00 5.0 A 0 0.33 • Insert clamping/unclamping procedure: First loosely attach the rear clamping screw, then the face screw. In the same order, tighten them both. • For user guide, see pages 542-547 (1) Number of inserts (2) Maximum ramping angle (3) For adaptation options, see page 548 (4) 0 - Without coolant supply, 1 - With coolant supply For inserts, see pages: HP ADCR 2207 (465) • HP ADKT/ADCT 2207 (464) Spare Parts Designation HP F90AT-22 SR 14-544 BLD T15/M7 SW6-T-SH SR M10X30 DIN912 DHUB DCONMS F75-M 75° Face Mills with SPKN/ SPKR 1203.. Inserts OAL 75˚ DC APMX DCX Designation DC DCX(1) CICT(2) APMX OAL DHUB DCONMS Arbor MIID(3) kg F75 D050-04-16-M 50.00 55.70 4 9.50 40.00 38.00 16.00 A SPKN 1203EDTR 0.50 F75 D063-05-22-M 63.00 68.70 5 9.50 40.00 48.00 22.00 A SPKN 1203EDTR 0.62 F75 D080-06-27-M 80.00 85.70 6 9.50 50.00 60.00 27.00 B SPKN 1203EDTR 1.09 F75 D100-07-32-M 100.00 105.70 7 9.50 50.00 78.00 32.00 B SPKN 1203EDTR 2.20 F75 D125-08-40-M 125.00 130.70 8 9.50 63.00 92.00 40.00 B SPKN 1203EDTR 4.10 • For user guide, see pages 542-547 (1) Cutting diameter maximum (2) Cutting item count (3) Master insert identification For inserts, see pages: SPKN ED.. (513) • SPKR ED..-76 (513) • SPKR EDTR-HS (513) Spare Parts Designation F75 D050-04-16-M SR M8X30DIN912 BLD IP20/S7 SW6-T LW35-475/8M SR-118-069-CH F75 D063-05-22-M SR M10X25 DIN912 BLD IP20/S7 SW6-T LW35-475/8M SR-118-069-CH F75 D080-06-27-M BLD IP20/S7 SW6-T LW35-475/8M SR-118-069-CH F75 D100-07-32-M BLD IP20/S7 SW6-T LW35-475/8M SR-118-069-CH F75 D125-08-40-M BLD IP20/S7 SW6-T LW35-475/8M SR-118-069-CH 216 ISCAR