Каталог Iscar токарные пластины ISO 2022 - страница 61

IC8250 IC6015IC830 IC806IC8250 IC8250 IC807IC8150 IC907 ISOTURN INSERTS 91° LNMX-HM 93° 93º93º Tangential Inserts with a INSL=L Positive Rake Angle for High Metal Removal on Soft RE and Ductile Materials W1 S Dimensions Tough 1  Hard Recommended Machining Data ap f Designation INSL W1 S RE (mm) (mm/rev) LNMX 110408L-HM 11.00 4.75 11.40 0.80 • • 1.00-5.00 0.10-0.40 LNMX 110408R-HM 11.00 4.75 11.40 0.80 • • • 1.00-5.00 0.10-0.40 LNMX 110412L-HM 11.00 4.75 11.40 1.20 • 1.00-5.00 0.10-0.40 LNMX 110412R-HM 11.00 4.75 11.40 1.20 • 1.00-5.00 0.10-0.40 LNMX 150608L-HM 15.00 6.40 13.40 0.80 • • • 1.00-6.00 0.10-0.50 LNMX 150608R-HM 15.00 6.40 13.40 0.80 • • • • 1.00-6.00 0.10-0.50 LNMX 150612R/L-HM 15.00 6.40 13.40 1.20 • • • 1.50-7.00 0.15-0.70 • For user guide and cutting speed recommendations, see pages 122-134, 236-248 For tools, see pages: C#-SLANR/L-TANG (48) • PLANR/L-TANG (46) • S-PLANR-TANG (100) • S-SLANR/L-TANG (100) • SLANR/L-15-TANG-JHP (48) • SLANR/L-TANG (47) • SLFNR/L-TANG (49) 91° LNMX-WG 93° 93º Tangentially Clamped Inserts INSL=L with a Wiper Corner Design for High Production Cutting RE and Excellent Surface Finish W1 S Dimensions Recommended Machining Data ap f Designation INSL W1 S RE (mm) (mm/rev) LNMX 150612R/L-WG 15.00 6.40 13.40 1.20 • 1.50-7.00 0.30-0.80 • For user guide and cutting speed recommendations, see pages 122-134, 236-248 For tools, see pages: C#-SLANR/L-TANG (48) • PLANR/L-TANG (46) • S-PLANR-TANG (100) • S-SLANR/L-TANG (100) • SLANR/L-15-TANG-JHP (48) • SLANR/L-TANG (47) • SLFNR/L-TANG (49) RE 78° LNMX-HF 12° Tangentially Clamped Rough Turning Inserts for High Feed INSL=L (up to 2.4 mm/Rev) W1 S Dimensions Tough 1  Hard Recommended Machining Data ap f Designation W1 INSL S RE (mm) (mm/rev) LNMX 1608L-HF 8.50 16.00 14.00 1.20 • • 0.50-2.40 1.50-2.40 LNMX 1608R-HF 8.50 16.00 14.00 1.20 • • • 0.50-2.40 1.50-2.40 • For user guide and cutting speed recommendations, see pages 122-134, 236-248 181