Каталог Iscar сверла со сменной режущей частью 2022 - страница 19

INDEXABLE DRILLS OAL LPR PL LU T-22 DCNM Modular SUMOCHAM Drill with DCN-DCX THSZMS DCONMS FLEXFIT Connection for Multi-Spindle and Swiss-Type Machines Designation DCN(1) DCX(2) DCONMS LU LPR PL OAL THSZMS SSC(3) TQ_3(4) DCNM 060-018-M12-3D 6.00 6.40 25.00 22.00 42.0 0.960 64.00 M12 6.0 33 K DCN 6-9.99-Y DCNM 065-020-M12-3D 6.50 6.90 25.00 24.30 44.3 1.180 66.30 M12 6.5 33 K DCN 6-9.99-Y DCNM 070-021-M12-3D 7.00 7.40 25.00 25.60 45.6 1.010 67.60 M12 7.0 33 K DCN 6-9.99 DCNM 075-023-M12-3D 7.50 7.90 25.00 27.60 47.6 1.100 69.60 M12 7.0 33 K DCN 6-9.99 DCNM 080-024-M12-3D 8.00 8.40 25.00 29.40 49.4 1.200 71.40 M12 8.0 33 K DCN 6-9.99 DCNM 085-025-M12-3D 8.50 8.90 25.00 30.40 50.4 1.290 72.40 M12 8.0 33 K DCN 6-9.99 DCNM 090-027-M12-3D 9.00 9.40 25.00 32.80 52.8 1.350 74.80 M12 9.0 33 K DCN 6-9.99 DCNM 095-029-M12-3D 9.50 9.90 25.00 34.80 54.8 1.440 76.80 M12 9.0 33 K DCN 6-9.99 DCNM 100-030-M12-3D 10.00 10.40 25.00 36.20 56.2 1.500 78.20 M12 10.0 33 K DCN 10-13.99 DCNM 105-032-M12-3D 10.50 10.90 25.00 38.20 58.2 1.590 80.20 M12 10.0 33 K DCN 10-13.99 DCNM 110-033-M12-3D 11.00 11.40 25.00 39.60 59.6 1.670 81.60 M12 11.0 33 K DCN 10-13.99 DCNM 115-035-M12-3D 11.50 11.90 25.00 41.60 61.6 1.760 83.60 M12 11.0 33 K DCN 10-13.99 DCNM 120-036-M12-3D 12.00 12.40 25.00 43.00 63.0 1.820 85.00 M12 12.0 33 K DCN 10-13.99 DCNM 125-037-M12-3D 12.50 12.90 25.00 44.00 64.0 1.910 86.00 M12 12.0 33 K DCN 10-13.99 DCNM 130-039-M12-3D 13.00 13.40 25.00 46.60 66.6 1.960 88.60 M12 13.0 33 K DCN 10-13.99 DCNM 135-041-M12-3D 13.50 13.90 25.00 48.60 68.6 2.050 90.60 M12 13.0 33 K DCN 10-13.99 DCNM 140-042-M12-3D 14.00 14.40 25.00 50.20 70.2 2.120 92.15 M12 14.0 33 K DCN 14-17.99 DCNM 145-044-M12-3D 14.50 14.90 25.00 52.20 72.2 2.210 94.15 M12 14.0 33 K DCN 14-17.99 DCNM 150-045-M12-3D 15.00 15.90 25.00 53.70 73.7 2.270 95.73 M12 15.0 33 K DCN 14-17.99 DCNM 160-048-M12-3D 16.00 16.90 25.00 57.30 77.3 2.420 99.30 M12 16.0 33 K DCN 14-17.99 DCNM 170-051-M12-3D 17.00 17.90 25.00 60.90 80.9 2.590 102.90 M12 17.0 33 K DCN 14-17.99 DCNM 180-054-M12-3D 18.00 18.90 25.00 64.50 84.5 2.730 106.50 M12 18.0 33 K DCN 18-21.99 DCNM 190-057-M12-3D 19.00 19.90 25.00 68.00 88.0 2.880 110.00 M12 19.0 33 K DCN 18-21.99 DCNM 200-060-M12-3D 20.00 20.90 25.00 71.60 91.6 3.020 113.60 M12 20.0 33 K DCN 18-21.99 • Do not mount smaller drilling heads other than the specified range of the drill body • For user guide and cutting conditions, see pages 68-81 (1) Cutting diameter minimum (2) Cutting diameter maximum (3) Seat size code (4) Tool tightening torque Nxm (lbfxin) For inserts, see pages: ICP (18) • ICP-2M (24) • ICK (28) • ICK-2M (32) • ICM (36) • ICN (42) • QCP-2M (43) • HCP-IQ (47) • FCP (52) • ICG (57) For holders, see pages: FLEXFIT HOLDER (17) For more holders see ISCAR MILLING LINES catalog WSC M12 3 FLATS CNT FLEXFIT HOLDER FLEXFIT Threaded Modular Shank with 3 Flats for Side Clamping DCONMS OAL Designation DCONMS OAL WSC(1) CNT FLEXFIT 160-HOLDER-DCN-MS 16.00 36.00 7.5 5/16"-24 FLEXFIT 1905-HOLDER-DCNMS 19.05 36.00 8.5 5/16"-24 FLEXFIT 200-HOLDER-DCN-MS 20.00 36.00 8.5 G1/8" BSP FLEXFIT 220-HOLDER-DCN-MS 22.00 48.00 9.5 G1/8" BSP FLEXFIT 250-HOLDER-DCN-MS 25.00 54.00 11.0 G1/8" BSP FLEXFIT 254-HOLDER-DCN-MS 25.40 54.00 11.0 G1/8" BSP (1) For all 3 flats For tools, see pages: DCNM (17) 17