Каталог Iscar сверла со сменной режущей частью 2022 - страница 17

INDEXABLE DRILLS OAL DCNS-3D LPR LS Exchangeable Head Drills without LU a Flange and One Flat Shank, DCN-DCX k7 DCONMSh6 Drilling Depth 3xD, Suitable PL for Chamfering Holders Designation DCN(1) DCX(2) DCONMS LU LPR PL LS OAL SSC(3) DCNS 075-022-080B-3D 7.50 7.90 8.00 23.60 34.2 1.100 36.0 70.20 7.0 K DCN 6-9.99 DCNS 080-024-080B-3D 8.00 8.40 8.00 25.20 34.7 1.200 36.0 70.70 8.0 K DCN 6-9.99 DCNS 085-025-090B-3D 8.50 8.90 9.00 26.79 36.8 1.290 36.0 72.90 8.0 K DCN 6-9.99 DCNS 090-027-090B-3D 9.00 9.40 9.00 28.35 38.8 1.350 36.0 74.80 9.0 K DCN 6-9.99 DCNS 095-029-100B-3D 9.50 9.90 10.00 29.94 40.3 1.440 36.0 76.30 9.0 K DCN 6-9.99 DCNS 100-030-100B-3D 10.00 10.40 10.00 31.50 45.2 1.500 41.0 86.20 10.0 K DCN 10-13.99 DCNS 105-032-110B-3D 10.50 10.90 11.00 33.09 46.7 1.590 41.0 87.70 10.0 K DCN 10-13.99 DCNS 110-033-110B-3D 11.00 11.40 11.00 34.67 48.6 1.670 41.0 89.60 11.0 K DCN 10-13.99 DCNS 115-035-120B-3D 11.50 11.90 12.00 36.26 50.1 1.760 41.0 91.10 11.0 K DCN 10-13.99 DCNS 120-036-120B-3D 12.00 12.40 12.00 37.82 52.0 1.820 41.0 93.00 12.0 K DCN 10-13.99 DCNS 125-037-130B-3D 12.50 12.90 13.00 34.41 53.5 1.910 46.0 99.50 12.0 K DCN 10-13.99 DCNS 130-039-130B-3D 13.00 13.40 13.00 40.96 55.6 1.960 47.0 102.60 13.0 K DCN 10-13.99 DCNS 135-041-140B-3D 13.50 13.90 14.00 42.55 57.1 2.050 43.0 100.10 13.0 K DCN 10-13.99 DCNS 140-042-140B-3D 14.00 14.40 14.00 44.12 59.2 2.120 44.0 103.20 14.0 K DCN 14-17.99 DCNS 145-044-150B-3D 14.50 14.90 15.00 45.71 60.7 2.210 45.0 105.70 14.0 K DCN 14-17.99 DCNS 150-045-150B-3D 15.00 15.90 15.00 47.27 62.7 2.270 45.0 107.70 15.0 K DCN 14-17.99 DCNS 160-048-160B-3D 16.00 16.90 16.00 50.42 69.6 2.420 48.0 117.70 16.0 K DCN 14-17.99 DCNS 170-051-170B-3D 17.00 17.90 17.00 53.59 71.9 2.590 48.0 119.90 17.0 K DCN 14-17.99 DCNS 180-054-180B-3D 18.00 18.90 18.00 56.73 75.5 2.730 48.0 123.50 18.0 K DCN 18-21.99 DCNS 190-057-190B-3D 19.00 19.90 19.00 59.88 78.6 2.880 54.0 132.60 19.0 K DCN 18-21.99 DCNS 200-060-200B-3D 20.00 20.90 20.00 63.02 88.1 3.020 54.0 142.10 20.0 K DCN 18-21.99 DCNS 210-063-210B-3D 21.00 21.90 21.00 66.18 90.7 3.180 60.0 150.70 21.0 K DCN 18-21.99 DCNS 220-066-220B-3D 22.00 22.90 22.00 69.32 94.3 3.320 60.0 154.30 22.0 K DCN 22-26.99 DCNS 230-069-230B-3D 23.00 23.90 23.00 72.46 97.8 3.460 60.0 157.80 23.0 K DCN 22-26.99 DCNS 240-072-240B-3D 24.00 24.90 24.00 75.62 101.3 3.620 60.0 161.40 24.0 K DCN 22-26.99 DCNS 250-075-250B-3D 25.00 25.90 25.00 78.80 105.0 3.800 60.0 165.00 25.0 K DCN 22-26.99 • Do not mount smaller drilling heads other than the specified range of the drill body • For user guide and cutting conditions, see pages 86-81 • For CHAMRING, see page 139 (1) Cutting diameter minimum (2) Cutting diameter maximum (3) Seat size code For inserts, see pages: ICP (18) • ICP-2M (24) • ICK (28) • ICK-2M (32) • ICM (36) • ICN (42) • QCP-2M (43) • HCP-IQ (47) • FCP (52) • ICG (57) 15