Каталог Iscar сверла со сменной режущей частью 2022 - страница 15

INDEXABLE DRILLS DCN C-3D OAL Exchangeable Head Drills with LU LSPL Coolant Holes and a Cylindrical Shank, Drilling Depth 3xD DCN-DCXk7 DCONMSh6 Designation DCN(2) DCX(3) DCONMS LU PL LS OAL SSC(4) MIID(5) DCN 040-012-06C-3D (1) 4.00 4.40 6.00 12.62 0.620 35.0 57.70 4.0 ICP 040 DCN 045-014-06C-3D (1) 4.50 4.90 6.00 14.16 0.660 35.0 59.65 4.5 ICP 045 DCN 050-015-06C-3D (1) 5.00 5.40 6.00 15.73 0.730 35.0 61.30 5.0 ICP 050 DCN 055-017-06C-3D (1) 5.50 5.90 6.00 17.31 0.810 35.0 63.15 5.5 ICP 055 DCN 060-018-08C-3D 6.00 6.40 8.00 18.96 0.960 36.0 64.00 6.0 ICP 060 K DCN 6-9.99-Y DCN 065-020-08C-3D 6.50 6.90 8.00 20.68 1.180 36.0 65.80 6.5 ICP 065 K DCN 6-9.99-Y DCN 070-021-08C-3D 7.00 7.40 8.00 22.01 1.010 36.0 67.60 7.0 ICP 070 K DCN 6-9.99 DCN 075-023-08C-3D 7.50 7.90 8.00 23.60 1.100 36.0 69.10 7.0 ICP 075 K DCN 6-9.99 DCN 080-024-10C-3D 8.00 8.40 10.00 25.20 1.200 40.0 75.40 8.0 ICP 080 K DCN 6-9.99 DCN 085-026-10C-3D 8.50 8.90 10.00 27.69 1.290 40.0 76.90 8.0 ICP 085 K DCN 6-9.99 DCN 090-027-10C-3D 9.00 9.40 10.00 28.38 1.350 40.0 78.80 9.0 ICP 090 K DCN 6-9.99 DCN 095-029-10C-3D 9.50 9.90 10.00 29.94 1.440 40.0 80.30 9.0 ICP 095 K DCN 6-9.99 • Do not mount smaller drilling heads other than the specified range of the drill body • For user guide and cutting conditions, see pages 68-81 (1) The SK DCN key is supplied with the insert (2) Cutting diameter minimum (3) Cutting diameter maximum (4) Seat size code (5) Master insert identification For inserts, see pages: ICP (18) • ICP-2M (24) • ICK (28) • ICK-2M (32) • ICM (36) • ICN (42) • QCP-2M (43) • HCP-IQ (47) • FCP (52) DCN C-5D OAL Exchangeable Head Drills with PL LU LS Coolant Holes and a Cylindrical Shank, Drilling Depth 5xD DCN-DCXk7 DCONMSh6 Designation DCN(2) DCX(3) DCONMS LU PL LS OAL SSC(4) MIID(5) DCN 040-020-06C-5D (1) 4.00 4.40 6.00 20.62 0.620 35.0 65.70 4.0 ICP 040 DCN 045-023-06C-5D (1) 4.50 4.90 6.00 23.16 0.660 35.0 68.65 4.5 ICP 045 DCN 050-025-06C-5D (1) 5.00 5.40 6.00 25.73 0.730 35.0 71.30 5.0 ICP 050 DCN 055-028-06C-5D (1) 5.50 5.90 6.00 28.31 0.810 35.0 74.15 5.5 ICP 055 DCN 060-030-08C-5D 6.00 6.40 8.00 30.96 0.960 36.0 76.00 6.0 ICP 060 K DCN 6-9.99-Y DCN 065-033-08C-5D 6.50 6.90 8.00 33.68 1.180 36.0 78.80 6.5 ICP 065 K DCN 6-9.99-Y DCN 070-035-08C-5D 7.00 7.40 8.00 36.01 1.010 36.0 81.60 7.0 ICP 070 K DCN 6-9.99 DCN 075-038-08C-5D 7.50 7.90 8.00 38.60 1.100 36.0 84.10 7.0 ICP 075 K DCN 6-9.99 DCN 080-040-10C-5D 8.00 8.40 10.00 41.20 1.200 40.0 91.40 8.0 ICP 080 K DCN 6-9.99 DCN 085-043-10C-5D 8.50 8.90 10.00 43.79 1.290 40.0 93.90 8.0 ICP 085 K DCN 6-9.99 DCN 090-045-10C-5D 9.00 9.40 10.00 46.35 1.350 40.0 96.80 9.0 ICP 090 K DCN 6-9.99 DCN 095-048-10C-5D 9.50 9.90 10.00 48.94 1.440 40.0 99.30 9.0 ICP 095 K DCN 6-9.99 • Do not mount smaller drilling heads other than the specified range of the drill body • For user guide and cutting conditions, see pages 68-81 (1) The SK DCN key is supplied with the insert (2) Cutting diameter minimum (3) Cutting diameter maximum (4) Seat size code (5) Master insert identification For inserts, see pages: ICP (18) • ICP-2M (24) • ICK (28) • ICK-2M (32) • ICM (36) • ICN (42) • QCP-2M (43) • HCP-IQ (47) • FCP (52) 13